About Tahir Ali

Tahir Ali · 02-22-2011

Hi all,I have a small question,we have an nms which is getting the alarms for the stack port down from all of our 3750 stackable switches.We havent connected or configured any stacking and dont want to, as we are using our switches without stack.to c...

Tahir Ali · 02-09-2009

Dear all,I wanted to know why do we enable sparse mode in SP cloud when we are using SSM also. (ip ssm default). Since SSM dosent need any RP then why we need the sparse mode together to be used with SSM in the SP cloud.

Tahir Ali · 02-06-2009

Dear all,I wanted to know why do we enable sparse mode in SP cloud when we are using SSM also. (ip ssm default). Since SSM dosent need any RP then why we need the sparse mode together to be used with SSM in the SP cloud.

Tahir Ali · 09-13-2008

Hi all,I have a cisco 851 router ( i.e 4 x switch ports, 1 routed port and only 1 Vlan support i.e VLAN1 and integrated wireless AP).I have dual WAN links, one is for internet and other is for the private WAN.Wireless users need to access internet an...

Tahir Ali · 08-30-2008

Dear All,I have a very basic scenario, of one 6500 with FWSM.I have created 4 vlans one inside, outside, dmz1 and dmz2. the outside interface is connected to the MSFC using SVI and rest of the vlans are part of FWSM vlan group i.e vlan 10, 20, 30, 40...

Tahir Ali · 09-01-2008

thanks Giuseppe, We have implemented the route maps and in it we have put the next hop for both the interface as the SP gateway IPs respectively. We are also implementing static nat that is my incoming interface ips are statically natted to public ip...

Tahir Ali · 08-31-2008

yes the icmp permit any echo inside and echo-reply inside worked. Thanks very much for your support

Tahir Ali · 08-30-2008

Well i have tried every thing u mentioned, the inspect commands, the ACLs, but still i cant ping from my host in 10.1.10.0 network to the inside interface for this network. i have read many config guides but nothing is missing in our config and we a...

Tahir Ali · 08-30-2008

Thanks Marwan, but the problem is that i cant ping from a host in inside network to the FW inter vlan in the same inside network. i.e 10.1.10.10 cant ping 10.1.10.1 ( inside interface ip). we havent even tried to reach outside.We have also checked wi...

Tahir Ali · 08-26-2008

Thanks very much for your help, it really cleared some issues in mind regarding WAAS integration. Last question which wasn't answered in my first post is what difference does it have of having WAAS in seperate VLAN or in common vlan within the LAN ne...

Member Since	‎01-07-2007 12:52 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	61

User Statistics

User Activity

Switch Stack Question

Multicast in SP cloud

Multicast protocol in SP cloud

Routing issue- 851 router

FWSM issue

Re: routing issue with dual homed internet

Re: FWSM issue

Re: FWSM issue

Re: FWSM issue

Re: WAAS placement query