About Jorgenw007

Jorgenw007 · 04-05-2022

Hello.We are in the process of moving a bunch of access points from an old supplier to us as a new supplier.The old supplier does have a WLC which "holds" all of the access points.I set up a new 9800 WLC, and tried to move one of the access points to...

Jorgenw007 · 04-07-2022

I am not sure why none of these commands work. But I am in enable mode.I got the commands to work from my controller, but not with ssh into the ap.And I dont have access to the previous suppliers controller, so it seems like the only method is to phy...

Jorgenw007 · 04-07-2022

Hello and thank you for the tip.i did this on One of the ap and moved it to the New subnet.i am getting a ssl error on the ap.currently on phone so I dont have the specific error but the AP does not want to join because of the ssl error.it looks like...

Jorgenw007 · 04-05-2022

Hello again Flavio.Thank you for your help so far.I figured out on my controller I could run the clear ap config <ap-name> keep-ip-config. That command rebooted the ap and cleared the config.Is the access point configured in a special way since I can...

Jorgenw007 · 04-05-2022

I am not experienced with either Cisco AP or WLC, but learning by the day.What is the command to show mode?The clear capwap private command is not recognized.

Jorgenw007 · 04-05-2022

Please see attached picture.The ap is 1702 connected to the controller which I have control over.

Member Since	‎04-05-2022 10:27 AM
Date Last Visited	‎04-14-2022 09:17 AM
Posts	8

User Statistics

User Activity

Move ap from one controller to another

Re: Move ap from one controller to another

Re: Move ap from one controller to another

Re: Move ap from one controller to another

Re: Move ap from one controller to another

Re: Move ap from one controller to another