Hello as per the below topology. I have two questions.1) When S1 sends the broadcast traffic for S2, through which link the broadcast will go?2) Also, when the broadcast reaches S2 it can send the same broadcast back to S1 as both the servers are co...
Hello,As per the below diagram I have two switches S1 & S2. Hosts H1 & H2 are connected to the switches and are in different vlan but same subnet. So, by default they will not communicate as they are in two different broadcast domain.To make them com...
Hello,As per the below topology. I have 3 switches connected to each other.Port has been blocked between S1 and S2 due to STP.All three switches have IP's configured as the gateways.Host H1 is connected to S3 and has it's default gateway configured a...
I tried running both the versions of spanning-tree but the none of the ports connecting between S1 & S2 are getting blocked.Also, I' am able to ping both the host after I trunk the ports and add native vlan 10 & 20 respectively.
