About Simone C

Simone C · 04-19-2024

Hello all, I'm having an issue with clients connected on my Guest SSID configured with Web Authentication Splash Page. Basically by today (NO CHANGES NOR ACTIVITIES WERE DONE) all the clients which are trying to connect to this SSID cannot reach th...

Simone C · 04-05-2024

Hello all, I'm facing an issue on a router Cisco CISCO2901/K9 with release flash0:c2900-universalk9-mz.SPA.157-3.M8.bin Basically I receive the following log errors when the EHWIC-4G-LTE-G inserted: *Apr 5 10:44:50.991: UNKNOWN WIC_TYPE:0x0 detect...

Simone C · 12-06-2023

Hello all, a few days ago (December 3rd) my wlc 9800-40 with sw 17.3.7 faced an issue where the active member and the standby switched over. I found the following logs about the event: Dec 3 15:19:07.495: %REDUNDANCY-3-STANDBY_LOST: Standby processo...

Simone C · 11-16-2023

Good morning all, I'm here because while trying to launch the following command: (config-if)authentication event server dead action authorize voice the device keeps saying to me the "invalid input detected" error". I've tried in other switches 2960 m...

Simone C · 11-15-2023

Good morning all, I'd like to replace some of my current HP switches with new Cisco devices, and I'd like to know the best corrisponding model. I have the following models at the moment: HP 2530-24GHP Procurve 2810-48GHP 2530-48G PoE+ARUBA 2530-24GAR...

Simone C · 04-22-2024

Hi! I'm trying to perform the "Debug client" command but I do not have that command in the debug cli" . Is it ok if I do it with the Radioactive Trace and then apply the "debug IP http all" command? By now the issue looks resolved by the way, many ...

Simone C · 04-22-2024

Hello David, I checked the parameters you suggested and I confirm all those three commands are present inside the CLI of my WLC. I also verifired again the correct association between the SSID Guest and the Policy Map in the "Security" tab inside it ...

Simone C · 04-21-2024

Hello All, Sorry for my delay on a feedback. I'm now reading all the answers you gave me. I'll come back to this thread once i Tried with the Debug analyzer and after checking if those commands are present: security web-auth security web-auth authe...

Simone C · 12-06-2023

Hello Rich and thank you for your suggestion. Since I did not find any particular info in the crashinfo file, I'm now raising a TAC case in order to follow the case with an engineer and see if we can find the issue. Thank you all for your help!

Simone C · 12-06-2023

Hello Marce and thank you for your immediate feedback!So by checking the reload reason i found this one: WLC#sho ver | i reloadLast reload reason: LocalSoft It's my first time I see this kind of reason, so I don't know what it means. Thank you very...

Member Since	‎02-08-2023 07:40 AM
Date Last Visited	‎04-29-2024 12:39 AM
Posts	21
Total Helpful Votes Received	2

User Statistics

User Activity

Client status locked in "Web Auth Pending" on WLC 9800-40

CISCO ROUTER 2900 SERIES %CELLWAN-4-CELLULAR_MODEM_SKU_MISMATCH

Wlc 9800-40 switchover but no info is provided for the last switchover

Command not recognized on switch WS-C2960G-48TC-L

Changing HP switches with equivalent Cisco switches?

Re: Client status locked in "Web Auth Pending" on WLC 9800-4

Re: Client status locked in "Web Auth Pending" on WLC 9800-4

Re: Client status locked in "Web Auth Pending" on WLC 9800-4

Re: Wlc 9800-40 switchover but no info is provided for the last switch

Re: Wlc 9800-40 switchover but no info is provided for the last switch