About tlarsen

tlarsen · 09-15-2021

Hi, I have a client supporting 802.11ax (Intel® Wi-Fi 6 AX200). In the specs it supports 2 special streams.But I can't connect it with more than 1! The test setup is a C9800-CL WLC with a 9120 AP connected. The only place I can find something you can...

tlarsen · 06-25-2021

Hi,I have a Flex Connect design on a new 9800 WLC.I would like to know if I can have a different VLAN ID per SSID like the AireOS FlexConnect Group - WLAN VLAN mapping. In my design the Flex Profile is equal to a Branch Office. So I would like to con...

tlarsen · 09-16-2021

Hi again, I found that this could be a 17.3.3 bug. Because the Current TxRateSet (m9 ss1) is not showing the right value!When I have a client connected with Current TxRateSet m9 ss1 I can see that the AP is using channel width on 80MHz.And the Client...

tlarsen · 06-25-2021

Hi,I know that document:)But i think that it's the Policy Profile that should be considered as a VLAN. And then when you do the Policy Tag (Branch Office) you map the WLAN to the Policy Profile (VLAN10). So if you need another Branch Offices with the...

tlarsen · 06-25-2021

Hi, The Flex connect is supported by the 2700 model. And the AP mode doesn't matter for the joining process.The joining process is likes this:AP sends the Discovery Request and the WLC answers with a Discovery Response.The AP will then send the Join...

Member Since	‎04-05-2017 12:37 AM
Date Last Visited	‎09-22-2021 12:21 AM
Posts	5
Total Helpful Votes Received	10

User Statistics

User Activity

Can't get a 802.11ax client connecting with 2 special streams!

How to do VLAN mapping per Flex Profile on a 9800 WLC

Re: Can't get a 802.11ax client connecting with 2 special streams!

Re: How to do VLAN mapping per Flex Profile on a 9800 WLC

Re: issue with adding AP2700 in vWLC