Hi, I would like to implement VLAN ACL on a layer 3 switch for filtering traffic between servers in the same VLAN. I have a doubt: I have several virtual server in this VLAN and I wonder if the VMware virtual switch will allow the virtual servers to ...
Hi, in order to restore all the virtual contexts of a failed firewall module is it sufficient to apply the failover configuration of the system context? If yes, is it possible to do it for restoring the primary or the secondary module indifferently?t...
Hi, I would need some clarifications about rogue AP detection. First, in order to configure the passive rogue detection is it necessary to just setup a rogue detector AP or I also need to enable RLDP? Second, in your experience how much is it reliabl...
Hi all, i'm going to upgrade a pair of WLC with a very old software image. Since this situation requires several intermediate upgrades, I was wondering if I can disable the distribution ports at the begining of the upgrade and then enable them at the...
Hi, an our custumer as an old C2900XL switch, with IOS 12.0(5.2)XU installed on it. The switch is in VTP client mode.I noticed that on this switch the STP has been disabled for some VLANs (don't ask me why, it was configured before my company started...
This is an old post, but in case someone have the same problem (like me ) you already checked basic connectivity and you are using an enterprise CA, the cause is probably that the vSmart do not get the CA certificate from the vManage. You can find a...
I had a the same problem and I solved it this way:- copied the CA certificate from my PC to the vSmart via SCP (the certificate will be copied in the home of your user on the vSmart. You can list the content of the directory going in vshell- installe...
Hi, what's the purpose of the routes above? These routes don't look correct as the next-hop is in the network of the route. Also, these networks are directly connectd.Regards,
