We want to utilise the 4 ports on the Cisco C9800-L-F-K9 to connect APs - and SVI interface on the WLC have been created on trunk TenGigabitEthernet0/1/0 with wlan 5 and 100 and - access port vlan 5 on TwoGigabitEthernet0/0/0 should these two/4 ports...

Nothing shows in WLC. How to get the CAPWAP tunnel up and running. Followed youtube video from Cisco to cofigure wlc. Thanks in advanced. They are connected to the same subnet which is 192.168.0.0 255.255.240.0 with gw on 192.168.0.1.[*03/19/2024 12:...