About Ignacho

Ignacho · 03-25-2024

Hi guys, When i configure the option b BGP on my ASR 9006 i need to enable the labeled unicast in BGP to the neighbor to see the mpls interface enable in the router, this ASBR is PE/RR inline too. Then I eliminate the labeled-unicast but the mpls int...

Ignacho · 03-23-2024

Hi, in BGP option B the ASBR swap label by route o by vrf if the ASBR have the vrf configure?

Ignacho · 03-27-2024

Hi Harold,This is the configuration:router bgp XXXXnsrbgp router-id 10.11.0.205bgp graceful-restart restart-time 120mpls activateinterface GigabitEthernet0/3/0/18.2100!router staticmaximum path ipv4 140000address-family ipv4 unicast10.10.5.2/32 Gigab...

Ignacho · 03-25-2024

Hi @Harold Ritter , i use the same RD. Yes, i change the rd in the ASBR and works ok the swap labels. Well, this bug don´t have solution for the moment?, thanks for your help.Regards,Renzo

Ignacho · 03-24-2024

Hi @Harold Ritter , is a ASR 9006 and have 6.7.3 versión ios-xr. In our case, i see this labels on ASBR:1.- vrf not configureshow bgp vpnv4 unicast rd 6147:10014 l$Sun Mar 24 23:52:43.708 *>i192.168.104.9/32 10.11.0.207 102 24135*>i192.168.114.9/32 1...

Ignacho · 03-24-2024

Hi @Harold Ritter ,In our escenary, the other ASBR is a Juniper router and it can swap label by vrf inclusive when it is ASBR/PE because it has the vrf configured.Well, the behavier of ASBR cisco is normally like that or ir can do anything, maybe wit...

Ignacho · 03-23-2024

Thanks Harold for your answer, i was test this command before but doesn't works when the ASBR have configure the same vrf that's the PE has, do you have another suggestion about that?

Member Since	‎03-23-2024 12:19 PM
Date Last Visited	‎04-05-2024 12:24 AM
Posts	7
Total Helpful Votes Received	3

User Statistics

User Activity

Labeled unicast enable in option b?

Swap labels vrf ASBR

Re: Labeled unicast enable in option b?

Re: Swap labels vrf ASBR

Re: Swap labels vrf ASBR

Re: Swap labels vrf ASBR

Re: Swap labels vrf ASBR