Hi Champs,Need a small and easy clarification. Can someone explain me what is CLS/RTD and what does it means for on passive side of circuits spvc.Any help will be appreciated.Regards,Ankur
Hi Champs,Can anyone give me some insight about the AU mapping?What is it and what is it used for? It will be great if someone can post the link which can give me some insight about AU4.In brief I know it is used for SDH multiplexing for STM to DS1 l...
Hi Champs,I am sure someone can help me with the same. I have e1 links between the 2 sites which are conneted via the radio links.As soon as the radio link fades the e1 link goes down. There are few condition of fading which is severe fading and ligh...
Hi Champs,Want to clear some doubts ;)Thre is a terminology Unstructured DS1and Structured DS1 which is further divided into Channelize and unchannelizedI understand Unstructured DS1 is that a single pipe will be used but when it is structured channe...
Hi Champs,Got a little confusion.Please make me clear.As ATM is a asynchronous transfer mode tech and in asynchronous mode the recurrence of cells containing information is not periodic.But TC sub-layer performs a function "Cell Rate Decoupling" in t...
Hi Shahid,As I told you in my previous posts you cannot compare etherchannel with RSTP. Both are different technologies and are used for different purposes.Only thing you can configure in etherchannel is the way it perform loadbalancing. You can also...
Hi Carl,If you have configured your switch 3550 itself as a DHCP server for all the clients residing in specific vlans then you do not need "ip helper-address" command.But incase you are having an external DHCP server like windows connected somewhere...
Hi Ali,To delete file from bootflash issue the command "delete bootflash:" and to delete it from slot0 issue the command "delete slot0:"Once delete command is issued you have to run squeeze command to permanenetly delete it from flash devices and get...
Hi Carl/Devang, Yes if you have 2 physical interfaces you can configure HSRP on both the interfaces. Both the interfaces should have HSRP peers on some other routers thats mandatory. Concept of HSRP is that there is no active router but there is an a...