About jeromehenry_2

jeromehenry_2 · 06-18-2008

Hi guys,I have 7921s with firmware 1.1.1, connecting to 1000 series LAP and 4402 controller running 4.2.99.DHCP server is behind the controller on a 3560. Call manager is 5.1.When I configure my WLAN for 802.1X (I am using EAP-FAST), my authenticatio...

jeromehenry_2 · 10-29-2009

Well, 871W is 802.11bg only, while 1242 is ABG, so you have more wireless space on the 1242 if you configure the same SSID on both radios...But the 1242 is not a router obviously, just a layer 2 AP, so you will need a router then...30 to 35 users is ...

jeromehenry_2 · 10-29-2009

You know,DCA is enabled by default, and there are only 3 non-overlapping channels anyway. Your APs are better on channels 1,6 and 11, hearing the neighboring APs (and taking their signals into account to determine when to send and when to stay quiet...

jeromehenry_2 · 10-28-2009

Hi,2 points:- Rogue policies are available on the 526 just like on the Enterprise solution (Check under Security > Wireless Protection Policies > Rogue policies)... but it may depend on which version of the code you run. This feature is available fro...

jeromehenry_2 · 10-28-2009

Hi Tony,thanks for your rating and glad your problem was solved. I do not see any short document on this principle, but this is how it works:Speeds can be mandatory, supported or disabled."Mandatory" means that the client HAS to be able to support th...

jeromehenry_2 · 10-28-2009

It has to be a trunk, because the rogue detector is used to detect the ARP requests, so you need to connect it to a trunk so that all ARP requests from all VLANs are detected.Hope it helpsJeromePS: please also check in this forum, there were a couple...

Member Since	‎06-09-2006 04:40 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	206
Total Helpful Votes Received	220

User Statistics

User Activity

7921 stuck to configuring IP

Re: 871W - Max wireless connections

Re: Block Rogue APs with Cisco Mobility Express 526?

Re: Block Rogue APs with Cisco Mobility Express 526?

Re: Berbee Push to Talk App multicast problem

Re: Rogue Detection (LWAPP):