About maldini.vivek

maldini.vivek · 08-17-2021

A sideWS-C6506-E with Supervisor Engine 2T10GBASE-X port B sideN9K-C9336C-FX2QSFP28 port Can I connect these two devices in the same room ?If yes, what optics and cable should be used?

maldini.vivek · 07-31-2019

Hi there! We aree in the process of replacing a EOL Cisco Catalyst WS-C4507R-E chassis with three Cisco Catalyst 9300-48P-E stackable Switches. So I would like to know if there is any Cisco tool which can convert the configuration. Appreciate your co...

maldini.vivek · 01-31-2017

Hi all, I have to upgrade the IOS on below switch to s2t54-ipservicesk9-mz.SPA.151-2.SY9.bin. Most of the cisco forums suggest below steps Option1 Step1. Copy the new image to bootdisk: Step2. Change Boot variable using 'boot system; command Step3....

maldini.vivek · 09-14-2016

Hi all, I am using a controller Cisco 7500 Series Wireless LAN Controller running Software Version 8.0.133.0 Trying to connect a AP cisco AIR-LAP1041N-E-K9 running code C1140-K9W8-M I get below error, Any help on this is appreciated. 8.0.133.0 rele...

maldini.vivek · 03-29-2016

Hi all, Much appreciate your help on this!! I normall upgrade/downgrade IOS using command 'software install' which is available in Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.03.05SE RELEAS...

maldini.vivek · 08-06-2019

Thanks Mark for the help!I will come back to you if I get an issue with any of the commands.

maldini.vivek · 08-01-2019

Hi Mark, Thanks for the reply.Unfortunately, Catalyst WS-C4507R-E is running IOS 12.2(53)SG. Also I could not find any config convert tool under below link :-(https://www.cisco.com/c/en/us/partners/tools.html Thank you

maldini.vivek · 03-29-2016

Thanks a lot Lulian. :-)

maldini.vivek · 03-17-2016

Thanks Philip for responding!!

maldini.vivek · 02-18-2016

Hi all, I have decided to boot from backup software as we are still having client issues with the new software. We are running WLC in Redundancy - SSO mode. Hence I get attached warning asking me to make sure both active and standby WLCs points to s...

Member Since	‎06-26-2015 07:38 AM
Date Last Visited	‎08-18-2021 12:04 AM
Posts	23

User Statistics

User Activity

Is it possible to connect 10GBASE-X port and QSFP28 port?

Converting the configuration of Cisco Catalyst WS-C4507R-E to Cisco Catalyst 9300-48P-E stackable Switch

Cisco WS-C6504-E IOS upgrade

AP fail to join controller

software install command not available

Re: Converting the configuration of Cisco Catalyst WS-C4507R-E to Cisco Catalyst 9300-48P-E stackable Switch

Re: Converting the configuration of Cisco Catalyst WS-C4507R-E to Cisco Catalyst 9300-48P-E stackable Switch

Thanks a lot Lulian. :-)

Thanks Philip for responding!

Hi all,