About billseymour

billseymour · 05-01-2024

This is getting really frustrating. Every time I try to ask this question it's tacked on to a different thread about a different question that is already answered, so no one answers. I am trying to routing incoming traffic to my Exchange server. As f...

billseymour · 04-28-2024

I know it's an oldie, but I needed something that could route to multiple subnets here at home... I started the basic setup to do what should be a simple job of getting a lease from my ISP using DHCP, then putting two subnets on my LAN side with all ...

billseymour · 04-22-2024

The host for my current server (Windows Hyper-V machine with four or five VMs) that handles my email and web sites is going away. I'm planning on moving that physical server to my house and using DDNS to route that traffic in. Realize this is very lo...

billseymour · 05-04-2019

I'm having some issues with port based dhcp, it seems simple enough, but clients are sometimes getting weird addresses instead of what's been assigned to that port. Here's an example config:version 15.0 no service pad service timestamps debug datetim...

billseymour · 11-14-2011

Did an upgrade to our RV016 last week, from 3.0.1.19-tm to 3.0.2.01-tm and now I get certificate errors when I attempt to use the Web Management (I have to add the cert each time I launch the management) and my VPN sessions no longer work at all. I g...

billseymour · 05-02-2024

And I think I have it working. I did add the entries for DNS port 53 but that by itself didn't provide the breakthrough. It looks like the root cause of the issue wasn't in the 2611 itself, but in the way Hyper-V handles virtual networks. I pared dow...

billseymour · 05-01-2024

Darn it, they added those last two posts to this thread, even though they are asking different questions. Hopefully someone will be monitoring the older threads so I can get an answer.

billseymour · 05-01-2024

I accidentally posted this to the wrong thread before, so let me try again... My next step doesn't seem to be working. I now have my internal clients all able to access the internet through one or two NATs. Here's my topology:Internet --- 2911 -+- my...

billseymour · 04-30-2024

The mail server is at 172.20.0.5, the main web server is at 172.20.0.4, the Server Essentials web server is behind the mesh router. Note that until the reverse proxy is up and running I won't be able to get traffic into the web server or the essentia...

billseymour · 04-30-2024

My next step doesn't seem to be working. I now have my internal clients all able to access the internet through one or two NATs. Here's my topology:Internet --- 2911 -+- mylocaldomain --- MEsh NAT router --- Local Server and clients ...

Member Since	‎12-09-2010 07:30 PM
Date Last Visited	‎04-24-2024 12:05 AM
Posts	26

User Statistics

User Activity

Routing incoming traffic

Cisco 2911 initial setup

IP routing using domain

DHCP Server Port-Based Address Allocation on a 2960 switch

RV016, 3.0.2.01-tm, PPTP and Windows client broken

Re: Routing incoming traffic

Re: IP routing using domain

Cisco 2911 routing incoming traffic

Re: Cisco 2911 routing incoming traffic

Cisco 2911 routing incoming traffic