About jgolden

jgolden · 05-09-2016

I am hoping someone can give me a hand. I am migrating from physical to virtual servers. I was able to migrate the Call Manager using BAT, however I am attempting to use COBRAS to migrate Unity Connection. I have worked through quite a few issues ...

jgolden · 04-13-2016

We purchased our system, and it has been rarely upgraded. I am taking ownership of this system and attempting to get us up and stable. The hardware is failing on the physical servers and I want to move it to our robust virtual infrastructure. I hav...

jgolden · 11-18-2014

Hello, I am at my wits end trying to figure this out. We have CUCM 8.0 at our main site and run an 1861 router at a remote site. The remote site is connected via a SIP trunk. Everything works except for MOH. When I look at the debugs I see that i...

jgolden · 02-03-2011

Hey everyone,I have been searching for awhile now, and can't seem to find any good documentation on this. We have Exchange 2010, and Cisco Unity 7.1.3. I am wondering if there is a way to get voice messages left for a user delivered to their exchan...

jgolden · 10-30-2009

I have a user who is having some strange issues with CUPC over VPN using Cisco VPN client. I just upgraded them to the latest version 5.0.06 from 5.0.03, so maybe that solved it. But I thought I would ask to see if anyone else had the same problem....

jgolden · 05-10-2016

Thanks Manish! I was missing both of those. I did not have the "Remote Administrator" role, and "Untrusted IP Addresses" was not allowed under the SMTP server settings. One more thing is to make sure that TLS is disabled, as it is required by default...

jgolden · 04-15-2016

Just to clarify. When we refer to BE5K which is what we bought. Are we referring to certain versions of CUCM, CUC on the physical hardware? I thought we are still running BE5k, even though we updated to version 8.6.2 of CUCM. So to create the stand...

jgolden · 04-14-2016

Thanks Jaime again! I am a little confused though. We do have 8.6(2) installed on our server. Does that change anything? Are you saying that we can virtualize if we have that version of call manager? We purchased BE5K, and upgraded it. My unders...

jgolden · 04-14-2016

Thanks Jaime, I was told by a Cisco Vendor that it could be done. I thought he might be wrong, because I was following all the instructions I could find and it would not work! Although not the answer I would like, at least I know at this point and ...

jgolden · 12-02-2015

For others who come here and are in the same boat as Karl you can also do this through the phone menu. Perform Factory Reset from Phone Menu To perform a factory reset of a phone, Procedure Step 1 Press Applications. Step 2 Choose Admin Settings...

Member Since	‎10-30-2009 01:26 PM
Date Last Visited	‎04-17-2018 08:28 AM
Posts	15
Total Helpful Votes Received	15

User Statistics

User Activity

COBRAS Error, Network connection is broken

Virtualize then upgrade BE5k

Setup Music on Hold between CUCM and CME on 1861

How to deliver voice messages into Exchange mailboxes

CUPC strange issues over VPN

Thanks Manish! I was missing

Just to clarify. When we

Thanks Jaime again!

Thanks Jaime,

For others who come here and