About robpeay

robpeay · 03-20-2014

I have configured a 2911 with one serial interface card and 2 hwic-4esw cards. I configured 2 vlans on the router. the serial card is in slot 0, and the 2 esw's are in slot 1 and 2. the 4esw in slot 1 works fine. I can communicate across both vla...

robpeay · 04-18-2011

I was just wondering if anyone knew if the IE 3000 with the 12.2.55SE IOS supports NAT?

robpeay · 03-17-2008

How do you configure the 4404 so that only one ssid is sent to one floor? IE... SSID - 4th_Floor is sent to the AP's only on the 4th floor?

robpeay · 07-22-2015

I agree with Alexey. change the subnet behind your firewall to something else. Use your firewall as a DHCP (if that is what you are using the tw router for as well). then you can set two static default routes out (one weighted) to the two differen...

robpeay · 05-26-2015

1. create 2 server groups. the first one will be sub 1 sub2 pub (in that order) the second would be sub 2 sub 1 pub. the reason to do this is to load balance your phones and make sure that no one server is doing all the work.2. if you are saying ...

robpeay · 05-22-2015

Yes, it is called "shared lines". you can have the same extension on multiple phones ( you must make sure to configure it exactly the same for each phone ie...partitions, CSS..etc).

In Unity, it is called · 05-22-2015

In Unity, it is called alternate extension. Here is the same problem resolved by someone else https://supportforums.cisco.com/discussion/11527831/mwi-alternate-extension

robpeay · 03-21-2014

Worked like a charm! thank you sir!

Member Since	‎05-20-2004 08:08 AM
Date Last Visited	‎08-18-2017 03:57 AM
Posts	18
Total Helpful Votes Received	20

User Statistics

User Activity

2911 with one serial card and 2 hwic-4esw cards

IE 3000 and NAT

4404 multi-story building

I agree with Alexey. change

1. create 2 server groups.

Yes, it is called "shared

In Unity, it is called

Worked like a charm! thank