By default TFTP and FTP for this feature use VRF management.https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/fundamentals/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x/b_Cisco_Nexus_...
Hi Sergioordaz,If you want to allocate the TCAM space to SVI then You need to free up 512 bytes of TCAM. This will allow you to add TCAM space to SVI. You can refer below document for TCAM carving on Nexus 9000.https://www.cisco.com/c/en/us/support/d...
vPC <vPCnumber> command is missing under port-channel.
Example.
switch(config-if)# vpc 5
Kindly refer below link for better understanding of vPC configuration.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/interfaces/confi...
Hi Ramirov,
You can upgrade switches by using below command and First upgrade Primary switch.
install all nxos bootflash:image.bin
You Can reefer below doc for understanding upgrade
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus...
The message is displayed when the ssh server on the device is trying to send a response to the client, but the connection from the client has been terminated unexpectedly. Hence a syslog message is logged for the write error.
PS: Please don't forget...
