About leowls

leowls · 03-12-2019

I have been following a NAT tutorial and I have a simple to ask.Assume there is only 1 IP 209.165.100.30 configured on g0/0and we want to NAT the IP 209.165.100.29 to the HoneyPot server, where and how are we going to set the IP 209.165.100.29 at? D...

leowls · 03-11-2019

With reference to this: https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/115904-asa-config-dmz-00.html The acl configured at the end for dmz, why is it being placed inbound rather than outbound in the dm...

leowls · 03-06-2019

Hello guys,Do anyone where can I study more examples of such setup on the internet? I'm looking for more examples like the one below. https://www.networkstraining.com/cisco-switch-layer2-layer3-design-and-configuration/

leowls · 01-29-2019

http://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41260-189.html#diag Hi guys, with reference to the above link, it seems to miss out on the router's configuration. What I would like to know is should we also configure stati...

leowls · 07-27-2018

Hi guys, I have seen tutorials that include and omit out domain name in the configuration of the SSH in a router/switch. What is the significance of including it? And does it have any impact if it's omitted?

leowls · 03-13-2019

Hi luis, So 209.165.100.29 is not necessary to configured at any router interface since it is already included in /30 mask in g0/0 interface?

leowls · 01-29-2019

Thanks Seb and Jon. It makes sense now. cheers!

leowls · 01-29-2019

Hi Seb,Thank you for the reply.A question. Why does the 7206 need a route to the 10.1.0.0/16 network? I thought the "IP routing" command in the 3550 takes care of that already?

leowls · 07-27-2018

Hi Iwen,Thanks for the infor. Below I have gathered the commands (based on your tutorial) needed to set it up and have commented some as optional. Pls take a look and correct me if I'm wrong.crypto key generate rsa label SSH-KEY modulus 4096ip ssh rs...

leowls · 07-27-2018

Hi Paul, Is the domain name locally significant only? If I have 2 switches can I configure SSH on them with 2 different domain names?

Member Since	‎07-04-2017 07:18 AM
Date Last Visited	‎03-14-2019 11:42 PM
Posts	19

User Statistics

User Activity

Static NAT question

ASA ACL question

Cisco Switch Layer2 and Layer3 Design and Configuration

Intervlan with routed port

SSH

Re: Static NAT question

Re: Intervlan with routed port

Re: Intervlan with routed port

Re: SSH

Re: SSH