About Chris Schroeder

Chris Schroeder · 04-25-2024

Switch A, Cisco 9300, VTP mode transparentinterface GigabitEthernet1/0/5switchport access vlan 3switchport mode accessSwitch B, Cisco 3560, VTP mode transparentinterface GigabitEthernet1/0/1switchport access vlan 3switchport mode accessVlan 3 (L2) vl...

Chris Schroeder · 05-12-2023

Cisco 1120 running FDM version 6.6.1-91. Console (cable) CLI credentials use RADIUS, just like all other authentication methods to the FDM.We're getting ready to upgrade our FDM. We want to be able to log into the console (using serial console cable...

Chris Schroeder · 03-17-2021

I am creating PowerShell script for API on Firepower 1120 (NO FCM, just a standalone chassis managed with FDM). I have tested the API itself using the FDM "API Explorer" as follows (obviously account names and passwords are not real): {"grant_type": ...

Chris Schroeder · 03-16-2021

We have the following hardware:Model Cisco Firepower 1120 Threat Defense Software 6.6.1-91 VDB341.0 Intrusion Rule UpdateI have a general questions about how things are labeled with Firepower.FDM=Firewall Device Manager. Since we have a hardware Fire...

Chris Schroeder · 02-04-2021

At my organization, we are not admins on our own machines, and we usually can't install software. So I've been running Cisco Active Advisor Desktop Scanner from one of our monitoring servers. Keep in mind, this is NOT the version that you run fro...

Chris Schroeder · 05-12-2023

Please disregard, we had the wrong local password. Local auth works fine even when RADIUS is enabled.

Chris Schroeder · 10-29-2020

This post by Janaka above: boot system flash:isr4300-universalk9.03.13.08.S.154-3.S8-ext.SPA.bin <--and remove boot system flash bootflash:isr4300-universalk9.03.13.08.S.154-3.S8-ext.SPA.bin ...was the solution for me. I had a continual boot loop b...

Chris Schroeder · 08-12-2020

Thank you. I found out by working with TAC this morning that the file that contains the initial web-interface password is in a document that is NOT included on the Software Download page for SSM at: https://software.cisco.com/download/home/28628550...

Chris Schroeder · 11-30-2018

That is the solution, Georg. Based on this information we changed the concept of what we were doing from a route-map to a different method altogether. It's a bit frustrating that the 6500 platform accepts the route-map vrf next hop command but it d...

Chris Schroeder · 11-29-2018

Thanks Burt! Like I said, Vlan305 was my second choice. It didn't work on the actual inbound interfaces (pair, not etherchannel) either. Same results on those. Do you have any commands you'd like me to run to show you more information from the sw...

Member Since	‎01-07-2009 05:45 AM
Date Last Visited	‎05-03-2024 07:29 AM
Posts	25
Total Helpful Votes Received	12

User Statistics

User Activity

CDP Mismatch from CDP: Why?

Cisco 1120 running FDM. Console CLI credentials use RADIUS?

Creating PowerShell script for API on Firepower 1120 (NO FCM, just a standalone chassis managed with FDM)

Configuring a Firepower 1120 via the API? NO FMC present.

Cisco Active Advisor - DESKTOP Scanner version

Re: Cisco 1120 running FDM. Console CLI credentials use RADIUS?

Re: "boot the first valid file" not working

Re: CSSM Default SSH account, Default HTTP or HTTPS Account upon install of ISO

Re: Route map debug output

Re: Route map debug output