About Rohan Sonawane

Rohan Sonawane · 01-22-2015

Hello, We have a cisco ASA: ASA 5510 Security Plus license. Adaptive Security Appliance Software Version 7.2(5) (I know it is old).ASA is currently configured for remote access ipces vpn and site-to-site ipsec vpn. Both terminate on outside interface...

Rohan Sonawane · 09-13-2015

Hi, To set a catalyst switch to factory default use following commands:switch#erase startup-configswitch# reload To set a Small Business switch to factory default press the reset button on the switch.

Rohan Sonawane · 01-27-2015

Hi Rajesh, Can you provide link for that article?May be the article was written in different context? May be it was referring to port-security?Or else I have not read anywhere about a Cisco switch ignoring source MAC in ARP packets. Regards,Rohan.

Rohan Sonawane · 01-26-2015

Hello Rajesh, A switch works on L2 logic. For switch it doesn't matter whether its an ARP packet or DNS packet or OSPF packet, or any other packet. As long as a packet contains an Ethernet header, the switch will build its MAC table based on the fram...

Rohan Sonawane · 01-23-2015

Hi, Rohan. Yes, that was my goal, and I accomplished it with policy PAT :-) .ACL - Intresting traffic.NAT - Refer ACL as source.Global IP - Refer to NAT as IP before PAT. Thanks for you interest in the discussion. Rohan.

Rohan Sonawane · 01-23-2015

Hello Poonam, We are using a separate pool of IPs for RA.For now forget about network topology. Lets start fresh. My basic query: PATing on same interface. Sort of like nat (outside,outside). Is it possible? Thanks,Rohan.

Member Since	‎02-20-2014 07:01 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

ASA PAT on same interface.

Hi, To set a catalyst switch

Hi Rajesh, Can you provide

Hello Rajesh, A switch works

Hi, Rohan. Yes, that was my

Hello Poonam, We are using a