Hello guys,
I have the following configuration syntax on my IOS-XE (ASR1001) device:
!...!aaa authentication login default group local AUTH1aaa authentication enable default group AUTH1 noneaaa authorization consoleaaa authorization config-commandsaa...
Hello guys,
I am facing a new challenge, I have two interconnected equipments in which it is not possible to have remote access being inside one of them to the other via the SSH v2 protocol.
When I try to access from CRS-1 (IOS-XR) to ASR1k (IOS-XE) ...
Good morning, Carissimos,
I need your support, recently I noticed that when I try to execute the "ping" or "traceroute" commands to a peer-to-peer IP address with or without source, I get this message "% Invalid destination ipaddress" as below:
R...
Bom dia Carissimos,
Preciso de um suporte vosso, recentemente constatei que quando tento executar os comandos, "ping" ou "traceroute" para um endereço IP ponto a ponto com ou sem source apresenta-me esta mensagem "% Invalid destination ipaddress" c...
Good morning people,
I need a help in what it is, Authorization of commands for certain groups in ACS is the scenario below: I have two groups with privilege level 15, namely: ACS_TACACS_NOC and ACS_TACACS_OPER, - For the ACS_TACACS_OPER ...
Hi balaji
When I put the instruction below as suggested:
aaa authentication login default group tacacs + local,
you no longer have user access with both local user and domain user associated with ACS Server.
Example:
RT_IOS-XE(config)#aaa authe...
Good Sam,
Thanks for the feedback, also open a TAC, and they also suggested the same, as it is a production equipment and loads many services, we are preparing an action plan to perform the suggested action so as to avoid the minimum of possible dowt...
