About robertramsey

robertramsey · 04-23-2024

Hello,At my home, I had an 8 port 2960G switch die after a power outage today. I replaced it with a ISR 1921 that has an 8 port ESM. It's been a very long time since I messed with configuring ESMs... My plan was to just copy over all of the switch...

robertramsey · 04-22-2024

Hello,With the older ASA 5505, 5510, 5520, etc. series devices, you could add an SSP module that would give you IDS/IPS functionality. This functionality showed up in the ASDM GUI as an additional tab.The newer ASA 5506-X doesn't have a slot for a m...

robertramsey · 04-16-2024

Hello,The DISA STIG, V-239941, asks that the following be configured:event manager applet BACKUP_CONFIG event syslog pattern "SYSLOG_CONFIG_I" action 1 cli command "copy startup-config scp://userx:xxxxxxx@10.1.48.10//opt/config_backup" action 2 syslo...

robertramsey · 04-10-2024

Hello,When configuring SSL VPN, the default encryption type is "ssl server-version tlsv1.2 dtlsv1.2", which only shows up with a "show run all". In that output, I can also see that "ssl cipher tlsv1.2 medium" and "ssl cipher dtlsv1.2 medium" are disp...

robertramsey · 05-09-2023

Hello,The ASDM GUI doesn't show incremented hit (counter) values. I have a permit and deny firewall rule with logging enabled for notifications. The command line syntax shows the counter values, so I know they're accumulating. I'm running a Cisco ...

robertramsey · 04-24-2024

Hello,For anyone else having the same problem, I found my solution here:https://community.cisco.com/t5/switching/command-rejected-bad-vlan-allowed-list-you-have-to-include-all/m-p/2067603/highlight/true#M234772 Per Peter Paluch,On older switching pla...

robertramsey · 04-24-2024

Hello Marce1000,Because this is a configuration at home, I'm somewhat limited in the gear I have on hand. I suppose if a work switch died, I'd probably replace it with a spare; I just don't keep spares at home. I suppose I could purchase another 29...

robertramsey · 04-24-2024

Hello Georg,The syntax you proposed doesn't work for me:event manager applet Config_Backup description Backup running-config when changes are made event syslog id 111010 action 1 cli command "copy running-config tftp://192.168.1.10/firewall.cfg" ...

robertramsey · 04-22-2024

Hello Marvin,Thanks for the reply. So, the SSP version info displayed in a 'show ver' is due to legacy code from the older platforms. You mentioned a software module. I suppose that software module is something that would be activated with a licen...

robertramsey · 04-21-2024

Hello Georg,The syntax isn't working for me as written... I added "/noconfirm" to my copy syntax, which allows the command to work but the copying of the conf triggers a forever copy loop... You said your syntax worked. What does it look like in y...

Member Since	‎11-25-2015 04:38 PM
Date Last Visited	‎04-28-2024 01:21 PM
Posts	39
Total Helpful Votes Received	28

User Statistics

User Activity

Trunk commands for ISR ESM?

ASA 5506 SSP Version?

event syslog pattern syntax doesn't work

SSL VPN Encryption Type/s?

ASDM hits (counters) don't increment

Re: Trunk commands for ISR ESM?

Re: Trunk commands for ISR ESM?

Re: event syslog pattern syntax doesn't work

Re: ASA 5506 SSP Version?

Re: event syslog pattern syntax doesn't work