Hi Everyone, I hope everyone in the community is doing well.I have 4 SIP connections terminated to the vCUBE (PSTN, Webex, Teams, and on-prem CUCM). I am using DPG on each incoming dial-peer to route the call to the outgoing dial-peers. However, on t...
The outbound calls from CUCM to Webex Calling are failing, and an error SIP message is being received.SIP/2.0 488 Not Acceptable MediaVia: SIP/2.0/TCP 192.168.1.20:5065;branch=z9hG4bKd1e23d546546Warning: 399 192.168.1.100 "SRTP Offer/Answer not accep...
I am trying to integrate my local gateway with the webex, however the gateway is not registering :Sip debug shows that registration is not authorized:your help will be appriciated.show and debug outputs are attached:
This is my first time integrating on-prem CUCM with MS Teams. Your assistance with this issue will be appreciated.The SIP Trunk between the two systems is up and active; however, users on both systems cannot call each other.MS TEAMS:user's number: +1...
I am trying to integrate Cisco CUBE with Microsoft Teams. However, I am facing a SIP trunk issue where the CUBE is not receiving an 'OK' message from the MS Teams SIP proxy (sip.pstnhub.microsoft).I am attaching the output of the SIP-UA connection, m...
I completely deleted all DPG and dial-peer associations, then reconfigured and tested each one individually. Therefore, I assume the main issue was a call loop. I am utilizing a combination of server-group, e164-pattern-maps, and DPG.
You don't need to be harsh. I mentioned that I couldn't upload the debug file as a text. Secondly, I followed the guidelines step by step. I am not here to waste anyone's time. You couldn't even point out one mistake.if You can’t help with respect p...
in some way the debug out wont let me to be uploaded.Feb 16 14:50:38.932: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:INVITE sip:+442085733321@192.168.1.100:5060 SIP/2.0Via: SIP/2.0/TCP 192.168.1.20:5065;branch=z9hG4bKdd0c5dfdeef7From: "M Yare...
