The Cisco document bgp-mvpn-bgp-safi-129-ipv4.pdf (cisco.com) appears to refer to BGP SAFI 129 as the one used for mVPN configurations. This is totally confusing compared to the mVPN profile configuration guide Configure mVPN Profiles within Cisco IO...
I am trying to fix a non-operational, first deployment of a profile 14 mVPN configuration running on 3 PE routers connected in a triangle. All PEs run IOS-XR 7.10.2, and each PE is configured as anycast RP for PIM ASM in the MCAST VRF ("rp-address x...
Thank you for the new, all singing, all dancing interface of the DevNet Sandbox, but could someone point out where is the "reserve" button for a lab which is "reservable" ? Does this seem to be well hidden to me only ?
Hi There,
According to the Routing Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 7.5.x and also in a very nice article in this topic it is mentioned that, I quote "BoB does not provide a true Layer 3 check..."
Can someone expl...
I am wondering if there is any specific requirement for two routers to form ISIS adjacency over a switched ethernet network ? In other words, when they are not directly connected.
I have two ASR9K routers - R1 and R2 - connected directly over a BE in...
So when one says that "BFD over bundle does not provide a true Layer 3 check" then this statement is made by comparing BoB to a routing protocol and not to BLB or BOB-BLB coexistence mode, right? Ultimately this is also true then to any BFD variant I...
BoB cheks the links individually and notifies the bundlemgr, which will inturn bring down the whole bundle when the number of operational links isbelow the set limit, and this can trigger the routing protocol failover.Actually the bfd microsession do...
All in all, the key point is that routes imported from VPNv4 will not be exported back to VPNv4. Thank you @Harold Ritter for pointing this out. Also appreciate all the efforts by @MHM Cisco World , thank you.
@Harold Ritter I think your reply contradicts this article on PacketLife, the original source of confusion for me.
In that article, I quote :
"VRFs Customer_A and Customer_B will now import routes exported from VRF Shared in addition to their own "na...
