About quadrabe

quadrabe · 12-04-2023

HiEvery now and then we have a router that goes offline because of its 4G module.What we do now is physically go to the router and put in a reload.Is there a way to automatically restart only the 4G module whenever the router detects that it has no m...

quadrabe · 03-09-2023

Hi, new to AnsibleI have the following working config to get the show run and sh ip ospf nei and put it in a file.However, some routers don't have ospf neighbors, in that case I would like nothing added in the file. Now we get an "undefined variable"...

quadrabe · 02-17-2023

HiWe're running version 9.18(3).Whenever we try to add a syslog server with UDP/10514 we can see that the syslog server never receives a packet.If we change the port to 514 we can see packets arriving on the syslog server. However, we would like to u...

quadrabe · 12-02-2022

HiWe're trying to implement traffic policing to avoid following log message: %CERM-4-RX_BW_LIMIT: Maximum Rx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license. Following the whitepages https://...

quadrabe · 07-27-2022

HiWe're trying to use certificate based authentication for AnyConnect.I was actually hoping that group-url https://vpn.xxx.com/poc enable would put the user in the correct Tunnel Group.But as seen in the logs attached. That only happens when I config...

quadrabe · 12-05-2023

I've modified it a little more but this works!event manager applet restart_4gevent syslog pattern " %LINEPROTO-5-UPDOWN: Line protocol on Interface Cellular0/2/0, changed state to down" maxrun 180action 1.0 syslog msg "Cellular0/2/0 is down, waiting ...

quadrabe · 12-04-2023

I wrote this real quick, we'll have to do some testing to see if it works correctly.event manager applet restart_4gevent track 1 state downaction 1 syslog msg "Cellular0/2/0 is down, waiting for 60 seconds in case it comes back up"action 2 wait 60act...

quadrabe · 07-03-2023

The command is: license right-to-use activate ipservices

quadrabe · 03-13-2023

Okay, apparently I had an indentation error.That's fixed now and the playbook runs.However, for the routers that don't understand the "sh ip ospf nei" line we get the following error. fatal: [switch]: FAILED! => {"msg": "The task includes an option w...

quadrabe · 03-10-2023

HiI get the same error. It's a syntax error, not a function error.

Member Since	‎08-28-2019 06:55 AM
Date Last Visited	‎04-17-2024 12:47 AM
Posts	24
Total Helpful Votes Received	15

User Statistics

User Activity

Restart 4G module

Ansible ignore command if not supported

ASA Syslog UDP port 10514

Traffic Policing to avoid log message %CERM-4-RX_BW_LIMIT: Maximum Rx

Certificate based authentication fails to match tunnel group

Re: Restart 4G module

Re: Restart 4G module

Re: Router EIGRP command unrecognized on IE 4000 switch

Re: Ansible ignore command if not supported

Re: Ansible ignore command if not supported