Hi, Does anyone know from where I can get the MIB or list of OID for SPA122 Analog Gateway. I would like to be able to query the state of the line and registration. ThanksRonald
Hello,for enabling SRTP the manual of the SPA112 tells me to enable the "Secure Call Serv" Option under Voice -> User 1/2 -> Supplementary Service Settings. There is no such option. I'm on the newest firmware.Any hints? Model:SPA112, 2 FXSHardware V...
we need to compile a configuration file from xml about the new WRP500but the tool seems not supporting the input by xml, infact the --xml is not usable. any help about it? regardsRos
Here at my work, we have a UC320W that I plan on using as an employee WiFi spot. Im just wondering how I should go about integrating it with the rest of the system? It connects to one switch, which in turn connects to another switch, which in turn co...
EL PROBLEMA ESTABA EN EL SPA112 -REGIONAL -TONOSLos equipos los tengo configurados punto a punto en el spa3102 conectado una línea de telefono PSTN y en el spa112 en la línea 1 un telefono analógico, lo que tratamos de hacer es extender una línea de ...
HiI have a System A which is already set up.This System A includes a TMS VCS-C VCS-E and a C90 Codec.Everything works fine with this system. Now I want to install a new second system B.This system B includes a BE6K with Expressway-E, Expressway C, CU...
Hello :)I wonder if anyone can help me with our Cisco IP Phone spa525g.We had an old cisco phone before that worked a heck of lot better of finding contacts easier, all you need to do is press directory and press the dial number for the letters of co...
I would like for when a calls comes in that the call is automatically picked up with my headset, so that we don't have to click answer. I've tried the auto answer page which was already set to yes and that did work. Many thanks to All!! phone type: C...
Hello everybody, I have a cisco uc540 installed with two bri isdn interfaces which is working like a charme. Everything is working so far.I wanted to configure another did 33 as fax onramp service (formaly did 05 which was working) and I am not able ...
Have a SPA525G2 phone that lost connectivity. Discovered thru the network status page it did not have an IP address assigned. Hardware troubleshooting already performed includes: swapping out Ethernet cable, tried different port on switch, tested on...
I have a UC320w with SPA504G handsets. I've been trying to reset the date and time and have been unable to do so.I have access the my UC and access to the handset but am still unable to set the date and time. I read during my research on this, that...
Can someone please tell me what the differences between these two commands are: service phone daysBacklightNotActive 1service phone daysDisplayNotActive 1 We have 7945 and 7965 model phones. What will the effect be using one or the other of these co...
I have problem setting VLAN in Cisco ATA boxes SPA112/122 through XML files. VLAN is enabled but the id tag doesn't become as expected. The tag is set to 2 but in the ethernet frames sent the id is 1.My XML code:<router-configuration> <WAN_VLAN_Sett...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: