Hi Guys, I have 1552E AP Autonomus image and I converted into LWAPP image to be able to join WLC. But after convert the AP it's restart always and show this mesage:AP image integrity check FAILED! *Mar 1 00:00:48.263: Release image validation fail...
Forum Posts
we were able to use all SSIDs on our Cisco Ap Aironet 3600, after maintance from Global server , we are unable to see the SSIDS to connect, 2nd thing : some time the AP blinking blue & some time Steady Green but going to Stable Blue. in the GUI inte...
Resolved! editing "DCA channel list" for 5Ghz band
on wireless controller I found that there are only few radio channels are available for usage From my understanding, that may cause a problem for clients. Is there any command available to add channels to "DCA channel list" or this list is an attribu...
Hi All,We currently have HA 2 x 5508 WLC running 8.0.133.0 and want to purchase & deploy the new 3800 APs. We were told that we need to upgrade to version 8.4 for 3800APs connectivity? Is that correct and is version 8.4 stable ?Any suggestions are m...
Here is the run down. Purchased an 1850i with CAPWAP. Converted to ME with AIR-AP1850-K9-8-5-103-0.tar. Configured ME as stated in the guide. After configuration, I cannot access the ME GUI. I can connect to SSID and access the internet fine. W...
Resolved! Compatibility between AIR-AP1242AG-N-K9 and AIR-PWRINJ4 : is the latter power injector suitable ?
Good morning all,Just a simple question:Can I use the Cisco Aeronet AIR-PWRINJ4 with an AIR-AP1242AG-N-K9 wireless device ? (I realise that these normally are powered by an AIR-PWRINJ4.)If it's not suitable, what would be the reason?Thanks in advance...
Hello Wireless Experts I have a live deployment scenario for Cisco AP ( AIR-AP1832I-D-K9 ). Considering its Cisco Mobility Express feature please add your suggestions on deployment. Its my first deployment for Mobility Express. However got to know it...
Hi guys,I have Cisco AP outdoor 1552E and I connected with switch and power cord for power... I see RF-1 LED not working and can not see it in the WLC! What could be the problem? Actually I worked with this model before and work fine after connected...
Hi What about compatibility of this 2 things? (in subj)I can't find this antenna in official manual 2702E model ("External antennas supported on the 2702E" section)But we have in use this configuration (2702E + AIR-ANT2535SDW-R) Which problems can pr...
Can a AIR-ANT2460P-R be used with a Cisco 2802E AP? I have a unique situation where it is extremely difficult to replace the existing three AIR-ANT2460P-R, which are connected to a single 1242 AP; each antenna is in a separate aisle of environmentall...
Hi Everyone! I have a problem with the assigning of the right acl to a correct authenticated user, The setup:- 2 Cisco 5520 wlc's- a couple of 2802i and 2702i accespoints- 2 ISE 2.2 p3 installations- Cisco 2960x POE+ switchesThe flexconnect setup wi...
hello I am using a brand new Aironet 2802i access points connected to cisco FEX switch using a Flexconnect. the throughtput link gets up to 170mbps at the tops while using 802.11AC. while at home with Airport router I get 300Mbps. how come?
I just wanted to ask a random question. How many of you are utilizing Apple AirPlay in an enterprise environment? I'm looking at what will be needed to make this work, and would like to know who have gone through all this in a large network, and how ...
Hi Guys, I have one Cisco PI 2.1 Appliance and have the DVD for PI2.1 software and trying to boot the dvd from appliance but no hope. when I choose boot fronm DVD/CD gave not load and error! How to solve this issue Thanks for allMohammad
Hello Guys Hi I have AIR-CAP3502I-A-K9 I am not able to get into username/password prompt ,even when i press Enter , didnt get me there i need to learn how to join this AP Manulay to WLC can u pls help thanks
