Hello Experts,
I am facing issues to connect Guest user to my wlan.
Guests users are in turkey and my ISE is in Europe so there is 2 hour time diff between both countries.
In sponsorportal my tiumezone is set to GMT+3(Whcih is Turkey timezone) b...
Hi all
On at least one AP 3502i in lightweight mode I have a LOT of these errors:
*Mar 14 12:59:35.320: %DOT11-4-BA_FLUSH: Client:[Here various Mac Addresses] ba flush with 40240 200*Mar 14 13:01:41.045: %DOT11-4-BA_FLUSH: Client:[Here various Mac Ad...
Hi
I have tried to perform a debug client <MAC address> on WLC5508 but there isn't any output even though I restart the process of laptop client connecting to the wireless SSID.
I am trying to troubleshoot an issue on "Limited Access" as found from ...
Hi,
another issue : why do I have this :
(Cisco Controller) config>interface port public 2 Invalid port number, range is 1<>1
...if I have 4 ports on the controller ?
Thanks!
Hi Team,
We are having cisco 3802i access point and working through Mobility Express mode, when i am connecting to ISP modem directly, i can able to work with Mobile devices only not laptop's, mobile devices is giving the same bandwid...
I have configured a 6509 with a port-channel over 2 interfaces as the ap-manager interface for a 5508 WLC, see below. I am not able to ping the WLC ap-manager interface from the 6509 console port. The WLC ap-manager interface is on the vlan101 subnet...
Hi AllFirst time posting. I have a guest anchor controller in our DMZ servicing Apple devices. We are looking at options for using Apple TV to display/stream presentations from executive iPads and such. Since it uses bonjour (multicast) would I be ab...
Hi,
Has anyone done AP on a stick sitesurvey with the AP's in the title.
After i configure the ME AP and plug it to my site survey kit it dosent broadcast any ssid, i have confirmed that this is not POE issue.
And the error i am getting on the consol...
Hi,
Can you please inform me about the behaviour of the router C880, when it loses it APN server.
I would like to know it the router will attempt to connect to another APN server, how long this procedure will take, and how many times the router will...
Hello,
I have a WLC 5508 with 50 APs and there are 2 APs 3501 that suddenly lose connection to the WLC. When they lose connection i can ping them and i see them in the Switch with cdp.
They are in two differents branches and in those branches are oth...
Hi i have RAP AP which is failing to establish point to point link with MAP AP
On the logs for RAP AP i get the error message below:
*Mar 14 10:13:09.391: %LWAPP-4-CLIENTEVENTLOG: Not sending change state post as the radio admin is down, lrad state...
Hello,
We have aquired the following:1 AIR-CT2504-K9 Wireless Controller with 0 AP Licenses
25 C1FPAIRK9 Cisco ONE Foundation Perpetual - Wireless
What is the procedure in order to configure these 25 C1 AP licenses to the controller so that the co...
Expert,
We had 2 incidents of WLC reloading and no significant explanation from the logs.
We are running version 8.0.12x.0,
We're thinking of upgrading the version but need to know what is the stability status of version 8.0.121.0?
Thanks!
Richar...
Dear Team,
Kindly Provide me the solution.
We have Two Ap of Cisco 1832.
1 ap have Cisco Mobility express os
1 ap have lightweight os.
i configured the mobility express ap as controller with ip address 192.168.9.1 and ap ip address as 192.168.9.2.
i...
We have three wireless controllers (5508) SW: 7.6.130 in enterprise with around 250 AP. ( 2600, 3702, e t c )
They all, on different networks, over L3. no mobility configured between them.
Problem: on some Access points, users get connected to SSID, ...
