Wireless

Hi, I have configured three APs 3702I with the same SSID and passwords , they are separated about 10 meters. when the clients move from one AP to another,  no roaming take place even though the signal level is around -90 dbm. When APs 3702I are in st...

I have several autonomous AP with multiple ssids ...I wanted to apply QoS (limit download speed and upload) for a specific wlan...how can I do ??basically I wanted to limit speed to 4Mbps for all equipment that were in that WLAN.it's possible??In WLC...

This is a continuing irritation with the WLC 5508. The AP device listing seems to be randomized, and I can not figure out how to sort the list. There is no order to anything that I can see, not by device name, or MAC address, or uptime. It's incredib...

We have a pretty solid setup for our wireless, with a wlan dedicated to LXE MX7 scan guns who use WPA Shared keys as their way of "connecting".The first demo we used of the MX7 worked without an issue, the newer demo of the same version of scanner gu...

Hello, in our logistic plant, we want to add 3702e Accesspoint, and i have few question: Does the AP comes with 4 antena?  I think it is possible to plug 4 external antena, is it correct? but i want to know if i can plug only 1 external Antena with a...

I have a 3702 access point which is up and running on a 5508 controller running 8.0.121.x code.  The site has Cisco Prime (2.2) running.  Prime sees all of the other 3702 access points but one.  When you check the controller the one problem access po...

I have a  2504 controller and I am trying to add a 1200 series AP .  The controller has version 7.2.120 version and the AP was just converted from autonomous to lwapp by tftpd32. Here is what the AP is showing when it is booting up and fails to joi...

Hello,  I'm currently doing an internship and i've been asked to set up a network with a radius server and two WAP 351 up to date. As you will see in the attachment, the network is very simple. Firstly, I have set up all the radius part with one ...

Something that would really be useful is a way to see what SFP is currently in a 1552H mesh node. These nodes are up on masts and can only be accessed through much approval. On a switch when you do a show int status it will actually tell you what typ...

Hello everyone, My client has a 8510 running code 8.0.133. We want to go on 8.3 and trying it out in lab at the moment. We are wondering what the HTTP proxy inside Flexconnect groups does? And also the WSA date publishing in Management Cloud Service...

Hi Team, We have installed Cisco Controller with 22 AP's with one of our client. When we connected through AP the gateway which is configured in L3 switch pinging with high latency(File attached). We have configured multiple vlan, the SSID which c...

Hidebug dot11 dot11Radio 1 trace print rcv *Oct 3 11:48:59.303: 64064EEF-1 23F150 - pak flags 0*Oct 3 11:48:59.303: 64064EEC r 12 59/59/64/68 38- 4801 030 7A76C5 22F130 7A76C5 A040 null l0 Here what is client rssi what is the null value Thanks

Can i use Cisco Access Point 2702i with switch 2960+ 48pst-l with out poe injector or power adapter? 2702i have interface 10/100/1000  poe support and 2960+ have 10/100 poe support.