Wireless

Bonjour j'ai un point d'accée cisco 702i , lié a un switch et ce dernier lié a un routeur fibre débit de 20mo   je me suis connecté par wifi sur le point d'accées le problème c'est que le débit n'est pas stable, elle varie parfois environ 5mo et 17m...

Hello All,We have ordered AIR-PWRINJ-30= instead of AIR-PWRINJ4= for a customer for 2702i APs. Both are showing 30w output. My question is Can the AIR-PWRINJ-30= be used instead of AIR-PWRINJ4= for the 2702i APs. On the face of it - they seem to be w...

I have six access points on my 2960 24ps. The other day four of these went down. These four all get power from the switch, the other two do not (they are still up). Looking at the switch, I am unable to see the access points connected with cdp neighb...

We are planning to convert to a PI to 3.0 system. The current version is 2.2. Just wanted to know if it is still possible to have two concurrent PI systems running against (1) pool of WLCs? This was possible years ago when changing from WCS to NCS. I...

we have successfully deploy a wireless network in my company, we use cisco aircap 1602i-e-k9 as wireless hidden network. all the devices running smoothly but i have found the issue of signals in few laptops running in my office, the laptops can not r...

Hi,   i have 3 Access points AIR-AP1232AG-E-K9, quite a bit old, but working. AP1 and AP2 are connecting with a trunk to a switch to separate a Hotspot and a private network with VLANS and MBSSIDs only with there 2,4 GHZ Radios. Now i want a point-to...

Tue Aug 16 15:32:28 2016 AP 'xxxxx-AP-xxxx', MAC: xx:xx:xx:xx disassociated previously due to Link Failure. Uptime: 0 days, 01 h 09 m 54 s . Reason: Capwap configuration status. Hello,    Pings to vWLC work fine. All other AP's work fine off of t...

Is it possible to view the FT / 80211r key information (such as MSK) when debugging a client.   I have a 5508 running 7.6 and the manual says "debug ft keys enable" will do it, but instead the controller replies: Incorrect input! Use 'debug ft events...

Hi, on the last days i sell a cisco aironet 1532, the access point can be configured standalone, without a WLC? Best regards

Hi,  I just bought 3 units of the Cisco AIR-CAP2702I-A-K9 for an office and I was under the impression that they were stand alone. I am not able to access it through any webpage or telnet to it.  I have a few questions 1) What's the default password ...

Hi,  I just bought 3 units of the Cisco AIR-CAP2702I-A-K9 for an office and I was under the impression that they were stand alone. I am not able to access it through any webpage or telnet to it.  I have a few questions 1) What's the default password ...

What are the MAC Flooding preventing techniques in cisco Wireless controller(5508), cisco switches core - 4550 distribution- 4550 access-2960how we can prevent mac flooding from borth LAN and WLAN ?

a PC was working ok when the system was windows 7 32 bit.  Upgraded it to Windows 7 64 bit and cannot get the system to see the Aironet. Is there a driver available for the 64 bit Aironet for Window 7 ? Cheryl Gross IT Specialist

I have a WAP4410N that has served me well for many years. Alas it seems to have gone flaky. Replacing this with a decent equivalent AP or router is an expensive decision. does anyone have any guidance as to whether this is in any any repairable? Here...