Wireless

Hi,I am facing a strange problem with the AIR-PWRINJ1500-2.At times the injector behaves perfectly fine but once Switched Off & again Powered On, all 3 LEDs, never become stable & blink continuously.Has someone seen such a behavior ? Pls, share. Than...

Dear Techies.... I have a problem in Wirelesss....If I reboot coreswitch or firewall or unplug or replug the WLC cable....means disturbance to WLC, entire APs will go down. APs are having DHCP IPs...when we check on DHCP server there are no requests...

Hi  previously the APS 2602 are registering with controller now it join with controller the flowing  console output of 2602 AP F1-AP3#F1-AP3#F1-AP3#F1-AP3#*Aug 3 11:45:43.035: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255*Aug 3 11:...

Hi all,      after some trouble I was able to migrate my AIR-AP1852E-E-K9 from CAPWAP to Autonomous. It is now running AIR-AP1850-K9-8.2.100.0.tar (I know it is outdated but it's the only I was able to get not having a smartnet). I've some questions ...

Hello I have a problem to join a 1702i AP to the 5520 controller. I have attached the debug capwap and the console output of the AP. On the Controller runs the newest SW Release 8.3.102 Has anyone an idea whats the problem? Thanks for your help

Dears , i want enable feature on WLC 2504 :   1)i want only user with specific mac address to connect to SSID    2) i want web authentication for users to access internet with (username & password)  3) is there feature to allow ssid to appeared only...

Hi Every, I'm wondering if anyone came across this issue as yet with new WLC code 8.2.111. On our WLAN, It's limiting the clients to only 9 by generating the below error: ewmwebWebauth1: Jul28 10:05:57.355: <mac-address> Added the MAC entry for User...

Will disabled APs try to join another controller when it's primary controller reboots?  I figure they will.  Is there an easy way to prevent them from trying to join another controller?

I have Cisco AP 1242. When I started something to download from Internet maximum downloading speed goes upto 16 Mbps even I have 40 Mbps link from ISP. While troubleshooting, I monitored AP fastethernet interface pointing towards WLC and radio interf...

Hi Just confirmation on the wording, for best practices “More than 4 SSID per radio.  High SSID counts may contribute to higher channel utilization.  It is advisable to keep the SSID count per radio to a minimum needed” Currently have 10 SSID broad...

Can the 2504 be configured to communicate with APs on one physical port while directing the wireless traffic out a different physical port?  We want APs on 10.1.7.0 subnet to send wireless data to the WLC (CAPWAP) on 1 physical port and then have tha...