Do wlan id's need to be same number accross all your WLCs on your network? If so is there a way to change them?thanks in advanceizzy
Do wlan id's need to be same number accross all your WLCs on your network? If so is there a way to change them?thanks in advanceizzy
It's fuzzy, but I seem to recall reading somewhere that I can use the same public CA cert on all WLCs for guest WebAuth, assuming the following:All WLCs virtual IPs are 1.1.1.1FQDN abc.mycompany.com resolves to 1.1.1.1 in my DNS provided to guests by...
Hello,I am trying to bring the mobility group between 5508 wlc (dmz) and internal 5508 wlc but it says control and data path down. (Ihave allowed port 97 and ports 16666-16667 both ways)1. should the ntp be sinked inline iwth other controllers ?2. sh...
Alguien conoce cuantas sentencias, paguinas o palabras puedo colocar en un router 1841 utilizando url filtering para bloquiar paginas? Estoy utilizando el class-match y policy-match para marcar las paginas y descartar los paquetes. Anexo un extracto ...
Hi,WiSM WLAN Service Module WS-SVC-WISM-1-K9 in 6509e running VSS IOs s72033-ipservicesk9_wan-mz.122-33.SXI2a.bin having trouble to get the IP from service-vlan DHCP also status LED 1 & Status LED 2 showing off.The pertinent config is as follows.!vla...
Is there any example or guide for integrated implementation of Cisco WLC (for web/EAP auth) and Cisco ISG (for policing)?
Controller: AIR-WLC4402-25-K9 with SW version 4.0.217.0APs: AIR-LAP1131AG-A-K9 I've inherited an environment and am trying to create a new WLAN that will allow the client PCs to use DHCP. I have one port on the 4402 configured that is trunking 3 V...
Anyone know why you can not set the interval under the Channel Assignment Method in RRM>DCA via NCS?NCS template allows you to choose automatic, On Demand or Disable. However when you select Automatic there is no option to change the interval? Is t...
Hello,How can I prevent clients on our network from being attached to both wireless and wired connection to our network. Both the wireless network and the wired network are unique to each other. Clients that are atached to both are killing our intern...
Hi.I'm having some problems with a h-reap deployment.I'm using two SSID's in a remote site with local switching, one for guest access and the other for local access to the network. Each of them is associated with a different VLAN.If I give access to ...
Hello What consequences could i have if i install a WiSM-2 module into a pair of 6500 configured in VSS and another WiSM-2 module into other pair of 6500 configured in VSS for serving a 300 APs??...in this case, do i need to configure mobility group...
Hi,I have a problem with a wireless client that it not able to ping a virtual IP of server in NLB modality.The WLC can do a ping to the first physical, to the second physical IP and the the virtual IP correctly.The Wireless Client can do a ping to th...
HelloI am having issues with 7921 phones roaming through a 802.11b/g/n network. The phones do not seem to be moving on to nearby APs at the right time therfore alowing the call to degrade and drop out. The network was designed and installed by anothe...
HiUsing WISM with 7.0.220 and 1240 and 3502 APs.Just found that some of our 3502 AP didn't enbale their clean air and CDP when installed.This only happened on a few new APs. But the area these APs where we seem to have had a few problems with PCs.Th...
Hi,What is the IP Degree of Protection for access point 1140?Many thanks,Yazeed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-03-2024 08:14 AM | ||
04-12-2024 05:27 AM | ||
04-10-2024 01:01 PM | ||
04-05-2024 06:44 PM | ||
04-04-2024 03:18 AM |
User | Count |
---|---|
12 | |
7 | |
3 | |
2 | |
2 |