HI,I'm trying to find out how to set up a Guest WiFi network with a custom captive portal, so that anyone who connects has to enter his / her e-mail address in order to identify who is actually using our wireless network, besides another security mea...
Forum Posts
A couple of questions for the experts out there on a WLC5508 v8.5.x latest code: Is there a CLI command that shows the actual data rates in effect, unlike the GUI that has a checkbox that will make it appear as if the rates are in effect when in fact...
Some computers will get a Valid IP but no internet from wifi while others connect normally. We are not a Cisco Shop, but have added a client that is nearly 100% Cisco less the Site level firewalls. All of the Computers/Users with the issue have been ...
regardsI have a question.I have 2 controllers that work properlyThe first has 50 licenses WLC CISCO 5508The second has 110 licenses. WLC CISCO 5508I would not use the first controller ¿I can move 50 licenses from the first controller to the second an...
Hi, We have installed Aironet-1562i-outdoor-access-point one of my project, While installation it was getting power from the 4506-E Switch and it was registered with Wireless LAN Controller, but now the Access point is not getting power from the swit...
Hello,we are having issues with several Surface Pro 3 device connecting to a standalone Aironet. Other Device connect to this AP no problem. SP3 connect to other APs (not cisco) no problem. So there seems to be an issue between the two devices. When ...
Hi all, New to the forum and looking for some help setting up and configuring a Cisco AP. So, I bought a AIR-AP2802E-E-K9C, well it says that on the outer box but the sticker on the AP actually says its a AIR-AP2802E-E-K9 model.So i watched a few you...
Hello, Looking for some guidance on how to enable Fast SSID change on the new C9800 WLC. Any help would be appreciated.
Hi All,I'm new to Cisco AP's and i'm having a bit of bother with a new Cisco 2802E AP. I'm using this AP as the central controller and as the DHCP Server for the network that they sit on. So the DHCP side of it is working fine, but it's handing out...
Hello we are using two 1832 AP's in Mobility Express Mode. The SSID is WPA2/PSK. Controller's internal DHCP Server is used. However, I don't understand why some Devices will show up with a Hostname and others as "unkown". I know that as long as I use...
Just curious if anyone here in the retail space have Adyen/VeriFone e285 devices? I'm looking for feedback since this device is only 2.4ghz. Utilization already in the malls on 2.4ghz is pretty high and I don’t believe these will work well at all, bu...
Hello, does Cisco wireless solution have a feature like Aruba AppRF ? I know meraki does, but I am asking about normal Cisco WLC & Prime solution, is this possible ? thanks.
Hi, I'm new to WiFi implementation and have 1 question. Why we should use ascii or hex with option under DHCP for the AP to discover the WLCI think as they are both in the same L2 LAN. AP should discover the controller without adding any option under...
Hi Team, I have to issue first I want to know how I can configure Band 2.4Ghz , 802.11b/g/n specifically on some access point & rest other access point should work as is with WLC 2500 without any issue. Please share steps through GUI how i can change...
Hello, I am having issues with our access points after a link failure.So satellite office with primary MPLS and backup VPN link.If MPLS link fails, all the access points become disconnected from the WLC. However if I reset the AP they will re-join t...
