Wireless

What does the below command do   config ap unifiedmode <switch_name> <switch_ip_address> If I execute this command from the an mobility express AP, does it convert the current AP also to capwap   Regards Nikhil

Hi guys. This log from my WLC 5520 is show this. [16, 3]  *spamApTask7: Mar 07 06:12:51.397: %LWAPP-3-REPLAY_ERR: spam_lrad.c:40145 The system has received replay error on slot 1, WLAN ID 1, count 1 from AP 84:b2:61:94:c8:10   [16, 3]  *spamApTas...

Does Cisco CleanAir 1602i (standalone model) support Universal Workgroup Bridge?  I read the release notes 15.2 but I couldn't find it.  Anyone is able to enlighten me, please?Thank you.

Hi, does it exist a template on Prime Infrastructure 3.1 to change the capwap Ip address of one or more lightweight AP joined to WLC?   thanks

Hi All   Can someone tell me what the difference is between a 2802i-B-K9 and a 2802i-E-K9?   Many thanks   Phil

Hello all, idiot time here. I recently aquired 8 ap1242ag-a-k9 APs. I want to donate them to use at a Church and would like to know the minimal equipment i would need to connect these to a FIOS DHCP router. I know a controller is needed, but which Am...

Hello, team,   I have WLC 8.5 with Flexconnect topology. My download/upload speed is about 30Mbit/s. When I turn on Flexconnect Local switching (when wireless traffice goes directrly to gateway without reaching the WLC) I get 60Mbit. WTF???   All my ...

Dear sirs,If there any Cisco recommendations or best practice documents on Key Performance Indicators of wireless network such as % of errors in Radio by AP, % of data passed trough AP, % of succesfull associations of users under each AP, % of unsu...

While powering on AP 1562 first time, I am getting the below error..   Not able to configured it..   Either using Switch POE or Power injectory (AIR-PWRINJ5)   pls help   =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.03.27 16:27:04 =~=~=~=~=~=~=~=~=~=~=~= [...

Status LED constantly red:      no clients are connected    -> I would expect a green lightStatus LED constantly blue:    Wifi-Clients connected        -> ok, as expected, Clients are connected normally Inline Power ok:    26,1 WattWLC / SW Version: ...

I have configured a Guest SSID using Web Auth.  I have installed a 3rd party SSL certificate and it is working perfectly.  Once connected to the SSID if they launch a browser it redirects them to the login page.    The issue is they want the browser ...

Hi   I'm looking for some help in interpreting the interference by channel graph on an AP.    See below.  The Noise vs Channel seems straight forward.  However, what am I seeing in the interference by Channel graphs?  In particular what are the high...