I have configured a guest network that authenticates using the local database in my 2500 series wireless controller. When I login, using the username/password I create, I see a success screen and I get an IP address but am not connected to the intern...
Forum Posts
Hi all, Is it possible to configure an AP 3700 as a repeater? I have configured one 3700 as the Access Point and I want to add another 3700 as a repeater (due to some infrastructure issues is not possible to run a cable). When I powered on the se...
Good morning, I'm almost entirely certain I've already found my answer but thought I'd get confirmation before telling the boss my findings. We have an old 5508 controller that's currently running 6.0.199.4. The AP's we currently have are AP1142N...
Resolved! NAT AND PBR On ASA 9.8
Hello, On a ASA we have a internet circuit and an MPLS circuit. Currently the ASA has a default route towards the MPLS. The Inside interface is sliced into multiple sub-interfaces. One of the them is for the guest wireless. We would like to send the ...
There was a question, whether it is possible to put antennas at a distance from an access point? How far? Is it possible to do so?Thank you.
HI Gents, I have a small issue and i hope you guys can help with. I have a Wireless network which was working fine with some old 3560 switches.... Last week, i went on and replaced all the 3560 to brand new stackable 3550(cat3k_caa-universalk9)...
We have a WLAN environement with APs in local mode. I was informed today we are having problems getting the QoS to work properly and suspect there is some misconfiguration between the AP/Switches/WLC. I am still gathering information on the scope ...
Hello every body, Does any one has worked on Cisco Beacon Solutions ? Wondering how does Beacon works and does Beacon analytics mandatory require application into mobile for good accuracy ? One of my client is opening a new showroom and is looki...
If a AP that is ME image,whether it can be a Fat AP,and broadcast SSID service clients? I think that ME AP can be WLC,also can be LAP.As a WLC,it is a Master AP,and must with Subordinate AP service clients,if it as a LAP,it will register a WLC.So,onl...
Hi Friends: I have some problem,please help me! HA two WLC5520, why turn off the primary device, and then boot, it can not form a HA,and at secondary device cannot ping the primary device redundant interface.What happened? Or, in HA mode, turn off th...
I am noticing slow downloads with users connected to my secured SSID. User on the Guest SSID (open) do not see the issue. Downloads are ~17mbs uploads are +50 mbs. I am testing using iperf server on same Vlan as the access point. Any help would be ap...
Hello. I have posted here before and finally getting into the nuts and bolts of the Aironet 3802. I am having issues with the configuration on the WLAN. Under the VLAN & Firewall settings I have the Native VLAN ID set to 1 and the VLAN ID under the D...
We have just upgraded to PI 3.2.2 Patch 1 and want to setup e-mail notifications for various alerts. When we go to create the notification policy it won't let us pick any of the Device Groups we've created because it shows an Empty List. The text ...
Hi Everyone, I was hoping I might be able to find someone who can help here. We purchased a Cisco AIR-CAP2702i-B-K9 access point for a satellite office from a third party vendor (SHI) and we are getting ready to try to set up and configure it. This...
