Hi,
our customer needs to control phones that are registered on SRST gateway. It's look that it is working if i configured gateway as CME in SRST mode. But only for Skinny phones.
I found document http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecti.html
and there is following information:
Only SCCP IP phones can be controlled by a CSTA client application. The Cisco VG224 Analog Phone Gateway and analog and SIP phones are supported as usual in Cisco Unified CME but not as IP phones for a CSTA client application.
Is there any way how to control new SIP Phone registered on CME/SRST?
Thanks
Ondrej Prochazka
