Cisco 819 speed values

[urbinir]

Hi

I'm working with a Cisco 819 4G/LTE (model C819HG-4G-G-K9) with modem Sierra MC7710

When the router attached to the UMTS mobile radio network I saw that the speed is 384000bit/s as showed below:

Cisco-819#sh run | beg line 3

line 3

 script dialer lte

 modem InOut

 no exec

 speed 384000

So the question is..Which is the speed showed from this output?

Downstream or Upstream speed (or both are same 384Kb/s)?

Thks

[mchance]

I am by no means an expert, but I would have to say both are 384 based on "modem InOut" and the fact that no other qualifiers are listed.

[urbinir]

Hi mchance,

I'm not sure of that because if I switch on GSM/EDGE mobile network that output showed  the tx and rx speed in different and separate values..instead when attached to UMTS network  the output showed a value only as explained above

Cisco-819#sh run | beg line 3  

line 3

script dialer lte

modem InOut

no exec

rxspeed 236800

txspeed 118000

Cisco-819#sh cellular 0 radio  

Radio power mode = ON

Channel Number = 614

Current Band = GSM 1800

Current RSSI = -47 dBm

Radio Access Technology(RAT) Preference = GSM

Radio Access Technology(RAT) Selected = EDGE

!