Switching

Hello Everyone, Need to confirm if we require any license or our switch is capable for SVL configuration.  Model- Cisco C9407R We have below license on the switch. Please let me know it is ok or not for SVL config.   #sh license summary License Usage...

I have two switches, switch 1 has vlan 10 and switch 2 has vlan 20, i don't configure anything on switch but it ping from vlan 10 pc to vlan 20 pc Pc1 ip 192.168.10.1Pc2 ip 192.168.10.2link between switches is not in trunk mode

Hello everyone, I hope you are all well.I came to ask for help regarding a very intriguing case.I'm in a project that involves high convergence connections between the Cisco C9600 (with two supervisors, 2 SFP modules of 100 and 50GB and 1 module with...

Hi i have many nexus 9K,3K sesris i want NMS with WEB interface if port up for example green if down redshow traffic live port VLAN ,..... and support can be shut or no shut port by nmsOpensouce is betterany idea???

Is it necessary to change the MTU for SVL links in a scenario in which interfaces are configured with MTU larger than default 1500 bytes?Traffic could flow between chassis through SVL links in a Stackwise Virtual cluster. Could not find any reference...

Hi,I have problem with creating stacking (Single IP management) on the C1000-24T-4X-L switch device.I used this manual:https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst1000/software/releases/15_2_7_e/configuration_guides/stacking/b_1527e_si...

Hi there, We're currently running a Cisco WS-C3850-12S switch with fiber interfaces for our network. It utilizes Layer 3 VLANs with basic routing and a few VRFs. While the Cisco C9300X-12Y-A seems like a suitable replacement, it exceeds our current n...

My Catalyst 2960-S won't load after power disruption. Boots to a very basic menu. "switch:" with only 15 commands to choose from.Is this switch savable, or should I just order a new one?TIA!

Hay, I know this is not best practice but i this is so much more practical for me as im always changing devices plugged into this switch, i want to know how i can tag all my vlans (10,11,12,13,14,15,20) onto all ports, i am very new to cisco so any h...

Hello all,i have a problem.i have 4G router from ISP and the port is connected to HP switch then one of HP ports connected to my Cisco Switchwhen The power is off then on at 4G router .. the 4G router internet light became red and that's mean there i...

Hello, Very new too packet tracer. I am creating a water level monitor with automated water pump smart system. I have created a "thing" for the pump, and have the pump, water level monitor, home gateway and smart phone connected. However when i go in...

Hi Guys ,  i check all parts , but it seems like it's stuck at 98% . can anyone please help me ? the packet tracer file attach just doesn't seem like it's reaching 98% , which part am i wrong ?