About mdufault

mdufault · 05-24-2003

Hi,I was wondering if anyone has done this kind of work already. What I am looking for is how to remove common unwanted processes on say routers mostly. The reason...To be more secure, save memory, etc...Examples like: http, finger, and most recently...

mdufault · 04-30-2024

I think your issue is that AS1 and AS2 on the same router will need you to specify an EIGRP router-id to be unique from an interface in it's corresponding AS. The outputs shown in the original post show that the same router-id is used.

mdufault · 06-01-2008

It works but I had similar issues, not understanding this new dual role port. I think you need to do the statement 'modem enable' under the con 0 and then should be ok. Here is my config.line con 0 modem enable speed 115200line aux 0 exec-timeout 0 0...

mdufault · 02-23-2007

I have been working on similar issues and the product is quite confusing. I think the way it works is you match the first group top down. You have 500 groups to work with so I think you need to create a group that has rights to both remote access and...

mdufault · 09-01-2005

Don't use the same security level. PIX work on high to low or low to high and not same to same.

mdufault · 08-20-2005

Look at the logs, you need to figure if it is passing traffic, then the problem lies elsewhere, like your ISP but I doubt that. Get your syslog server working or debug it on the PIX.

Member Since	‎12-27-2002 10:14 AM
Date Last Visited	‎05-07-2024 11:39 AM
Posts	10

User Statistics

User Activity

Minimizing running processes on routers/switches

Re: Multiple EIGRP autonomous systems on the same device and Poisoned

Re: Aux/Console port on 871 router?

Re: ACS Group Configuration Help Request

Re: Traffic between interfaces with same security level not work

Re: Strange Problem Any Help Appreciated