I have sub netted network 172.16.0.0 into 4 sub networks.172.16.0.0 - 172.16.0.63172.16.0.64 - 172.16.0.127172.16.0.128 - 172.16.0.191172.16.0.192 - 172.16.0.255 So, here as seen in the diagram below, PC0 should not communicate with PC10 as they are ...
We have the following IP's assigned to the VLAN interfaces interface Vlan100ip address 172.30.168.2 255.255.255.0(Range will be 172.30.168.0 - 172.30.168.255)interface Vlan200ip address 172.30.169.2 255.255.255.128(Range will be 172.30.169.0 - 172.3...
How do I set an interface on a Switch to default in Cisco packet Tracer.I tried the #default interface <Interface Name> command, it does not work.Tried placing "no" keyword before the command, but it is quite hectic process if we have a long list of ...
Could someone please explain me as to how to find the IP address range of a specific VLANBelow is an example which you can use for reference. How will I find the IP address range of VLAN 100, VLAN 200 and VLAN 300.172.29.6.2/25 vlan 100172.29.7.66/26...
