The Community is a hub for connecting with your peers and Cisco specialists to ask for help, share your expertise, build your network, and grow professionally. New Here? Click here to learn more and get started.
Cisco Community is an active and collaborative place to learn more about our products and ask questions of peers and Cisco experts! Check out some of the most popular conversations happening right now!
Hello Everyone, I am contacting you all because i don't seem to find the needed information to resolve my issues, even though there are many similar topic as mine with the same error.We have an infrastructure using FTD ASA5506 with switch CISCO WS-C2...
I've got 15+ Cisco ISR 4000's (a mix of 4331s and 4551s) in our network and when trying to setup Netflow to PRTG, It seems that when I hit 5 interfaces that need to be monitored, there is always 1 that won't come up in PRTG and that doesn't send data...
ASA working in IPSec, I am able to access HQ from UNIT No problem. Internet is only allowed on specific IPs which are outside DHCP Scope. When I assign IP for internet, now Internet is working, HQ Network is accessible, but S_EXT (webserver - 10.10.1...
Team,On this Te0/0/0.667 subinterface we have more than 200 users. so we set the PPPOE maximum session.After setting up PPPOE maximum session to 1000 , IPTV not connecting automatically and getting option SKIP or RETRY. after select skip IPTV getting...
Hi, i am trying to get the Finesse agent status from asp.net using javascript but all i get is server responded with a status of 415 (Unsupported Media Type).what i got so far var agentID = "user"; var finesseEndpoint = "http://mydomain.com:8082/fine...
Hi All,I have a couple of C9300 L3 switches that are connecting to an ASA firewall. The NTP and the syslog server for the switches are located behind a firewall.When one of the switches request/send packets the gateway IP is the source address on the...
Dear Community,I'm asking for you guidance. I have come across a challenge on Cisco ASA version 9.8. Need to allow a web server to be access outside(Public) from DMZ Zone to Ouside Zone. Per below configuration template. Nat is transilating but acce...
Hi,I have been testing MST in my lab which has 3x Cisco Catalyst WS-C2960CG-8TC-L switches.I configured only MST and LACP on each switch and connected them in the ring topology. Test is to see how much time it takes for convergence in such conditions...
Hello all, we are currently transitioning to a virtual 9800-CL WLC, hosted on a VMWare node on premise. The WLC and the FlexConnect APs are working correctly but I am experiencing a weird behavior with the interfaces. The APs are on VLAN 1 - 192.168...
Hello,Pleased help me! I have configured macro auto execute on Switch C3560E as below but it does not work, The idea is that when a link change to up, the switch automatically assigns this link to VLAN 10, and then link down, switch removes this link...
Dears, One of our customers has requested a custom gadget inside Finesse where agents who have more than 1 CSQ can choose which one to be ready on; the current state is the agent has to choose to be ready or no ready on all CSQs. Any hints? Thanks in...
We found N7K-C7010 line card module 3 reload and found logging as below. 2024 Apr 26 13:08:19 SNIPER-01 %SYSMGR-SLOT3-2-SERVICE_CRASHED: Service "nfp" (PID 1130) hasn't caught signal 11 (core will be saved).2024 Apr 26 13:08:20 SNIPER-01 %NFP-SLOT3...
What is the criteria to create SVI and VLANs in the 9800. If you take multiple AP management bands (vlan) to the same network Do I have to need several SVI and/or Vlans?
DNA/Catalyst Center is a great tool for surveillance and managing the network. But why cant we connect Catalyst 1000 switches to the Catalyst Center ????????
Hello Cisco fellowsI'm running viosl2 in GNS3 and unable to get load balancing working in etherchannel: the channel is up and running, however the user plane traffic all goes through one single link. If I disable the "active" link, the traffic is cor...