Hello, We have a user that has misplaced the USB Y cable RJ9/RJ11 that came with the 561 multibase. They use that cable to connect to a 7841 phone. I do not see that cable listed a spare to purchase in the data sheet or in CCW. Any advice on what...
Forum Posts
So I created and named a new 'mode' I no longer want in the B&O Android app for the 980 headset. How do I remove it?
Hi All,I have couple of Cisco Voice gateway in which we need to enable PRI Layer 2 status monitoring, if the PRI goes out of service we need an alert.We are using Solarwinds as monitoring tool and found in some Cisco community discussion that this ca...
Our certificate on our SBC expired and was renewed but the Portal for MS is still showing it as expired. Is there a way to see what certificate is being presented by the CUBE via a debug? Thanks, Joe
So we have a web application that we load as a Persistent Web App on a Cisco Room Navigator that are mounted outside meeting rooms, we would like to get the workspace metrics (TVOC, humidity, temperature) inside the room and display these metrics fro...
Resolved! Associate headset with user
I'm seeing an issue with our 8851 phones or the 561\562 headsetsI've been pressing Exit button on this screenThen I've been pressing No on this screenThe issue is, the phones keep prompting for "Associate headset with user"Users are not assigned to a...
I have conferenced headsets before but I have 2 users that are unable to conference headsets. I also use this model and I am unable to conference with another headset. I upgraded mine and a coworkers to firmware 2.4 I get the audio tone to pair but n...
I'm looking for a 3D CAD file for the Cisco Room Navigator, ideally with its tabletop and wall mounting hardware included. Any help would be appreciated.
Resolved! Lost USB bung for Cisco 730 headset
I have a Cisco 730 headset that the USB bung has gone missing.Can I buy a replacement? Any chance someone knows what the part number is?I'm assuming the bung is specific to the headset and an off-the-shelf Blue Tooth bung won't work, is that true?
I have a project that has several Cisco TCC5-12 table mics milled into conference tables. I want to reuse the mics or at least the mute button and LED. I have figured out the mute button but need some guidance on controlling the color of the LED us...
We're setting up call recording and listening to the WAV file with my SB561 headset, I can only hear one side of the conversation.I plugged in an SB562 headset and listening to the same file, I can hear both sides of the conversation in each ear.My c...
We use Cisco 8851 phones and Cisco SB562 and Cisco SB561Is there a call indicator light that will work with this combo?We have a USB solution that works for Jabber users, but have phone-only users who need a call indicator light...We thought the "Emb...
We are using Jabber phone services in a conference room were a user uses a hearing aide. The user has a hard time hearing the speakers from the camera/speaker/mic system and we added a JBL charge 5 bluetooth speaker (no microphone) so he could hear ...
We have a customer that is all 8851 phones, and they wanted a small headset that they can wear all day and not over the head. We opted for the 5200 UC and 5200 Office sets. We continue to have lots of issues with call quality with them. Even thoug...
I have a Cisco 562 multi-base headset. The base and the headset will not pair together. The base is just flashing the 5 white LEDs non stop and the headset is flashing it's white LED. After a reset of the phone (CISCO 8811) and the headset being turn...
