Cisco Catalyst Center

This community is for technical, feature, configuration and deployment questions. For production deployment issues, please contact the TAC!
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Don't miss this Cisco Catalyst 8000 offer

 

Forum Posts

I was designing SDA solution and came across one query "Is it mandatory to deploy ISE in the same premises with DNA center while integration or will it work if ISE can be at different country and DNA Center is at another country. Is it possible to in...

Hi   Does anyone have any experience if/how DNA Center integrates with Meraki wireless devices.   All the documentation I have found refers to Cisco WLC based wireless networks and how telemetry is pushed from the WLC's to DNA-C.  Does this work with...

Hello evrybody , i want provisioning  a switch C2960S but i get an error message : "File transfer using HTTPS and SCP failedExpected : Device need to have https/scp reachability to ControllerAction : Verify HTTPS/SCP configurations, DNAC certificate...

Hi There,   We are about to deploy Cisco Catalyst 9000 series. We wish to run on the perpetual license only and deactivate the DNA subscription license. In future we plan to activate the DNA subscription license. As I went through the release note ca...

In the SD Access Wireless Deployment Guide it shows that Fabric capability is enabled on a per WLAN basis, however when you try to do this in practice (DNA-C 1.2.5) it tells you than only one type of policy can be enabled per Site. Is this planned to...

Can we expect a usable CVD and/or deployment guide for an SD-Access LAN via DNA center?  The current CVD is 30 pages as opposed to the ISE CVD with is ~170 pages.  Add to that, current CVD has no quantifiable steps to accomplishing anything.  It simp...

casanavep by Level 3
  • 4483 Views
  • 3 replies
  • 0 Helpful votes

Hi,     Looking at the installation guide for DNA Center Appliance, in a standalone deployment, there are three requiered network connections:   1. First 10Gb port in the Virtual Interface Card (VIC) 1227 (enp9s0) --> To Enterprise Network   2. First...

Hello, all! I have read a lot of documentation about DNA but still have some questions. 1) What is the purpose of using underlay/overlay conception in SD-ACCESS? The only reason i see is to allow any devices not change its IP if they change their loc...

madmin.kz by Level 1
  • 8520 Views
  • 7 replies
  • 0 Helpful votes