Cisco Live Discussions

Hello, I want to ask if I'm using a smart license for a Cisco CSR , is it for the device or the device ? I mean let's say I have a license for 1 Gb so this speed for the device or for the interface if I'm using of course the CSR on a cloud ? Best Reg...

Hi community! This is my first post. So here goes. I have an ISR 1100 router with the nat outside interface getting an IP from my ISP via DHCP and the nat inside interface configured as 192.168.0.1 255.255.252.0. The nat inside interface is connected...

Greetings,I am using ISR 1100 series, I directly connect RJ -11 line to DSL port and write the configuration displayed below. But it is not working. I like to ask you how I can configure DSL by assigning the WAN ip address to the BDI interface on C11...

I am not able to delete this. Is this default?Switch(config)#no vrf definition Mgmt-vrf% Management interface VRF Mgmt-vrf can not be removed.I also tried setting gi0/0 to default but it is not able to.Switch(config)#do sh run int gi0/0Building confi...

Coming across this error when trying to remove the policy. Is this system default?Switch(config)#control-planeSwitch(config-cp)#no service-policy input system-cpp-policySwitch(config-cp)#*Mar 20 12:56:21.920: System cpp policy can not be removed from...

Hi, can you please help to get snmp oid for cisco SWAN router ISR4451-X/K9 . Thanks,Bikram Khuntia

Hello ,I really need to know what will happen if my CSR Cisco licenses are going to be expired ? I have 1Gb on those CSR cisco , so what will happen immediately after losing licenses ?Best Regards,

We are using Webex hosted by a service provider (UCaaS - Webex for Broadworks). Currently we are using Exchange 2019. And we would like to be able to schedule Webex Meetings from Outlook. Our service provider is struggling on how to make this work wi...

This product contains cryptogr  y ya no pasa de ahi.

Each time an agent receive or make a call, a pop up window appear at the bottom righ of the screen. From there, the agent can pick the call by pressing answer. For some reason, the pop up window doesn't appear for some agent. I've checked the setting...

i have new installed CUCM 11.5, i am receiving cdr error code 10011, i need support 

Hello Experts, don't know this is right forum or not, if not please suggest the right place to ask thanks in advance. I'm facing an issue with the load on our IDS (Intrusion Detection System). Currently, traffic from various sources is being forwarde...

We've just implemented the monitor session (SPAN) configuration on Nexus switches managed by NDFC. Making changes directly on a switch doesn't create any non-compliance with the NDFC configuration. I would like to know if there are specific categorie...

Hello Team, I am facing an issue with C1000-8T-2G-L model switch, So the issue was to can't access the switch SSH and from switch we have to ping to another device same network IP'S like laptops and switches then ping with high latency and more drops...