Semi-Retired, Fully Experienced
40+ years experience in IT / Computer Networking, including:
- 24 years as Cisco SE
- 19 years Enterprise IT, as both customer and Cisco SE
- 22 years SP experience, as both customer and Cisco SE
CCIExpired #5286
https://www.linkedin.com/in/jimberg/
This situation might be unique to EVE-NG. I run CML on a bare-metal 2x 12c Xeon with 256GB RAM. Using CML's defaults of 1 vCPU and 3GB vRAM, CSR1Kv 17.3.4a (image on 2.7 refplat) boots and is ready for action (green checkmark) in about 2.5 minutes.Ru...
Did you happen to capture any "show interface" output before swapping out routers? A snapshot from both sides of the link could give an indication as to whether there are any transmission errors.
CDP itself sends its port's native VLAN as a TLV with type 0x000a.https://learningnetwork.cisco.com/s/article/cisco-discovery-protocol-cdp-xhttps://wiki.wireshark.org/CDPYou can verify which native VLAN each port is advertising with a packet capture ...
XRv9K supports VLAN-tagged EoMPLS PWs. In CML, I have modeled a BNG use-case by virtually looping back the VLAN-tagged PW attachment circuit (via an unmanaged switch) into a second XRv9K interface with L3 subinterfaces to emulate the basic functional...
If I understand your question correctly... the CSR1000v's performance license limits the aggregate bi-directional forwarding throughput at the system level across all interfaces. That is, the license is not applied per-interface nor is it tied to any...