Have a customer who is buying TAC support for the Essentials Edition. Since there is no longer a license required, how does each instance get tied to the support contract?
Have a customer who is buying TAC support for the Essentials Edition. Since there is no longer a license required, how does each instance get tied to the support contract?
I installed the n1kv switch on esxi 5.1.I am using Nexus1000v.4.2.1.SV2.1.1a in L3 mode.I created the uplink port-profile with the following configport-profile type ethernet n1kv-uplink vmware port-group switchport mode trunk mtu 9000 switchport ...
Hello,I am taking care of a design involving nexus 1010 and a cluster of ESX ( for now two ESXs ). We are going to use l3 control as there is a couple of firewalls between the nexus 1010 and the ESX hosts.I don't have much knowledge about ESX so I ha...
hi,quite new to the nexus 5k, could someone point me to a conguration example of bgp within a vrf on the nexus 5000 ? It is configurred and the bgp is up and runnning, but having some problem with the advertisement of the networks that doesnt seem t...
I am implementing 1000v on ESXi servers connected via 2242UPs to 5596UPs via CNAs.The port configuration on the 5/2Ks is using the Cisco default which assigns 50% of the bandwidth of the 10Gb link to the server to FCoE (should it be needed)The questi...
I see this advertised on the main community page for the Nexus 1000V:Free Evaluation This program includes everything you need: VMware software, Cisco Nexus 1000V & Virtual Security Gateway (VSG) software, evaluation licenses, and installation docum...
I read that the max-ports command onyl works for Vethernet profiles. Does any one know how Ethernet profiles get their max ports defined? Is it dynamic?Thanks,John
Hi anybodyI have some question anybody help me please.1. Can i use both vmware vDS and Nexus 1000v in the same ESXi host2. How to migrate vmware guest from vmware vDS (current Production) to Nexus 1000v vDS without downtimeThan you.
I've got a 1000v environment on 1.4(a) and vSphere 4.1. Currently there are DVS across Dev and 2 prod environments. I'd like to be able to upgrade the vCenter to 5.1 before upgrading the 1000v's, however the compatibility doc for 1.4(a) doesn't menti...
Hi,I was wondering about how many VEMs would the below license allow? is it only 1?N1K-VLCPU-01= Nexus 1000V Paper CPU License Qty 1-Pack
With the advanced edition of the Nexus 1000V the VSG is included. Now do you get one VSG license for every VEM 1000V license you have or is the VSG license unlimited but you would just need VEM license to use it anyways? I am a bit confused. I am abo...
I am trying to do netconf on a Nexus 1KV for VMware Orchestrator automation. Initially I am trying to just send the hello thru ssh. I receive the hello from the server, then send the hello XML from the XML API documentation. And nothing happens. ...
If I have already purchased the Nexus1000V, is the VNMC inlcuded with that switch? Or would I need to additionally purchase VSG. Also, if I do need to purchase VSG, does that quantity need to match the quantity of the Nexus1000V to provide full acces...
All,Can someone clearly define the boudaries of a DVS with regard to vCenter?Reason I ask, is because if we look at the configuration limitations for the 1000v, under vEthernet interfaces, it shows 2k per DVS, but we see that each VEM/Host can have u...
Hello,I have a virtual lab with VMware Workstation 9 on the physical host OS.Within VMware Workstation I have two ESXi 5.1 hosts and a vCenter 5.1 VM.I managed to install Nexus 1000v distributed switch in vSphere.Within vSphere I have a NetApp Simula...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-25-2024 12:14 PM | ||
04-25-2024 11:29 AM | ||
04-24-2024 10:01 PM | ||
04-16-2024 04:52 AM | ||
04-10-2024 08:28 PM |