Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
For CME solution with 40 IP phone ,If I use 3 x FL-CME-SRST-5 , is it enough ,or i must also use 40 user license ?? From the technical view , by using only 3 x FL-CME-SRST-5 , the 40 phones will register and work or not??
Hello Cisco Support, "Can anyone of you guys support me in selection for Operator or attendant console. It's mentioned in data sheet of cisco 7915 and cisco 7916 that these are not work as operator or attendant console. So, please let me know for Op...
Hello Cisco Support Community, "Can anyone of you tell me the BHCC of BE6K and BE7K? Does it vary with cluster size or its same for whole system and independent to the various type of Cisco Unified Communication Manager. BHCC Defined as given belo...
Hello We have a problem with outgoing faxes with the new VG310. The VG tries to establish a connection 3 times without any success and times out. I did a "sh voice call 0/0/7" and got the following output: vaggvapf7-0201#sh voice call 0/0/70/0/7 vtsp...
Hi Guys, I have one doubt. Is there any way to increase the SIP channel in cucm for analog line (mainly for fax - Right fax) in SIP trunk configuration? the request is, CUCM has been configured with the SIP trunk to FAX which is working perfect. Now...
At work I use a Cisco IP phone 7965. I'd like to be able to add a coworkers extension to my home screen list on the right hand side and be able to pick up a call from their phone when they are away from their desk. Is this possible?
We have recently upgraded the software on our CUCM from 8.5 to 10.5 and I want to be able to disable the speakerphone feature on some phones (7945G). Under configuration layout on the phones I have selected the option to disable the speakerphone but...
I have CUCNBE 8.5 and am configuring Extension Mobility. I configured a Extension Mobility phone service:http://10.100.1.20:8080/emapp/EMAppServerlet?device=#DEVICENAME# and set the Service Category to XML Service.I have then subscribed tht phone to...
Hi everyone, I'm now upgrading from CUCM 8.6.2 to 11. To my understanding there are changes in best practices, such as making sure to use FQDNs rather than IP addresses for enterprise parameters. Does anyone know of a list of such best practices whi...
So nobody out there has had any experience with wireless 9971 phone? Good morning Are there simple steps out there to make this connection happen. have searched and followed some post but am not sure as to where the Verizon jetpack name and passw...
Hi we have CUCM, IMP 11.0.1 & Jabber for windows 11.1.1 on production We are unable to send files and share screen via jabber for windows client from chat window. BFCP is enabled on the SIP Profile for the CSF device. Also selected "use my computer t...
There is a call from PSTN to our company internal extention number through the auto operator number. When have dialed all the digits, the calling party can hear the ringback tone, but the called party is not ringing. What's the problem ? Waiting for ...
Hi, I am new to CME, I have two offices (located less than 100 meters) both offices have CME 2900 series Version 15.2(4)M3 and more than 40 phone extensions. I have one cable to connect between offices. office 1 : phone extension starts 201 office 2...
unable to call international calls. Running CME 10 on 2921 router have PRI circuit find call capture below. At&t says this is not there issue. using # for inter-digit timeout calling number 5864467604 caller number 80118128813990# call capture: 0...
i recently came to a new site to administer and they have some devices that are out of services but however still connected , for instance this VG224 analog gateway , i checked on the cucm and it wasn't listed as one of the gateways ? so does this m...
