Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have recently purchased two Bluetooth headsets the Jabra 45e and the Jabra Elite 85h. I can easily connect them to the computer audio and phone apps work ie. youtube or Microsoft Teams but I have issues with Cisco IP communicator. It will connect...
Hello everyone, I have a bizzare problem with a Cisco CP7911 running SIP firmware SIP11.9-4-2SR3-1S. After updating, these phones are stuck in 2008 and don't update their date/time. I have tried several different Timezone settings and a couple NTP se...
Hi AllWhat commands can I use to check a port on an analogue gateway is picking up? I did a debug signal vpn and got the following, can anyone explain if this looks ok and the call has picked up? 000163: Jul 2 11:32:42.748 BST: htsp_timer_stop3 htsp...
I saw all the posts for this phone.I dont see on which version of CME is supported.Also Im testing the c2900-universalk9-mz.SPA.151-4.M4.bin on a 2901 but it do not give me the option to load the firmware for this phone in the voice register global s...
DearsIn my network 3905 phones are not registering they are stuck in provisioning, attached are the logs and running configuration.
I need to upgrade our 10.x to 11.x cluster.I would naturally upgrade it directly on the server without prime. I don't want to install the new phone firmware as I havent time to test it so I'm looking to turn off tftp, upgrade then reassign the firmwa...
I have a need to pull a report to show calls into the number of the hunt group and what extension picked up the call. I tried to run the hunt group but it only shows the calls that came into the group. It does not show which extension retrieved it....
We have a mix of 30+ 4331 and 4351 routers in our organization. They were installed about a year back with code 16.6.5 and have been running since then. I have daily kron jobs that run a csim command to verify pots and t1 line function connected to t...
I have a problems with my Jabber device version 12.6.2.38119 it goes close automatically all the time.
Hello,I am facing issue with VG 224 few of the ports always in off-hook statusVG IOS Version : 12.4(2)T2CUCM Version :8.62/5 -- fxs-ls up up off-hook idle y2/6 -- fxs-ls up dorm on-hook idle y2/7 -- fxs...
I'm trying to solve an issue with some WYSE terminals having noticeable slow network connection when connected to the 8845s on site. When the phone is removed the connection is fine. The phones have the following firmware sip8845_65.11-5-1SR1-1. CUCM...
Version 9.1Calls are working fine but I can't get my bluetooth headset to work with it. Galaxy S4. Plantronics voyager pro headset. Normal cell phone calls work with the bluetooth headset fine. There is no bluetooth option in the jabber settings....
Hello experts,Can someone tell me, which way RTP traffic will take for 2 external Jabber user.So Callflow will be: external Jabber User A --> Expressway E --> Expressway C --> CUCM --> Expressway C --> Expressway E --> external Jabber User BSo if t...
CUCM System version: 11.5.1.15900-18 Phones 8811 firmware sip88xx.12-7-1-0001-393 Users in two different buildings are reporting their phones are beeping and flashing a message on the phone display telling them they are being too loud. Initially I th...
Dear All,I am going through one issue that incoming calls not working for all users for h323 gateway. below is the isdn debug.your help is much appreciated.*Jun 28 07:17:34.180: ISDN Se0/1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x7F00Bearer Capabili...
