Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
can anyone elaborate on this? LastOutOfService=17I have multiple 7925's and 8821's dropping calls. I've noticed in the debug display that they all have multiple instances of this out of service code. What causes this? Where should I be looking ?
Hi everybody, I have the following scenario: IP Phones (7821) - CME --- (SIP Trunk)---- PSTN. The outgoing calls are well, no problems with that. But in the incoming calls in first case (With rel100 enabled) doesnt establish calls. Ok, in SIP-UA I ha...
Is there a limit to how many times a call can be forwarded? For example I have a room of phones that are only used for specific events. When not in use those phones are forwarded to another number. However that number also gets forwarded off. So exam...
Hello, We have SIP trunk between two sites, the voice call working normally but when tried to use video call it working for just 1 sec then it disconnect. Do you have any idea? Appreciate your helpThanks
Good afternoon, I am organizing telephone support for sites, the company that contacted me uses your CP-8865-K9= phones and want to connect these phones to the network of their sites, for example - https://1x-rate.com/, I find this - https://www.cisc...
I have recently purchased two Bluetooth headsets the Jabra 45e and the Jabra Elite 85h. I can easily connect them to the computer audio and phone apps work ie. youtube or Microsoft Teams but I have issues with Cisco IP communicator. It will connect...
Hello everyone, I have a bizzare problem with a Cisco CP7911 running SIP firmware SIP11.9-4-2SR3-1S. After updating, these phones are stuck in 2008 and don't update their date/time. I have tried several different Timezone settings and a couple NTP se...
Hi AllWhat commands can I use to check a port on an analogue gateway is picking up? I did a debug signal vpn and got the following, can anyone explain if this looks ok and the call has picked up? 000163: Jul 2 11:32:42.748 BST: htsp_timer_stop3 htsp...
I saw all the posts for this phone.I dont see on which version of CME is supported.Also Im testing the c2900-universalk9-mz.SPA.151-4.M4.bin on a 2901 but it do not give me the option to load the firmware for this phone in the voice register global s...
DearsIn my network 3905 phones are not registering they are stuck in provisioning, attached are the logs and running configuration.
I need to upgrade our 10.x to 11.x cluster.I would naturally upgrade it directly on the server without prime. I don't want to install the new phone firmware as I havent time to test it so I'm looking to turn off tftp, upgrade then reassign the firmwa...
I have a need to pull a report to show calls into the number of the hunt group and what extension picked up the call. I tried to run the hunt group but it only shows the calls that came into the group. It does not show which extension retrieved it....
We have a mix of 30+ 4331 and 4351 routers in our organization. They were installed about a year back with code 16.6.5 and have been running since then. I have daily kron jobs that run a csim command to verify pots and t1 line function connected to t...
I have a problems with my Jabber device version 12.6.2.38119 it goes close automatically all the time.
Hello,I am facing issue with VG 224 few of the ports always in off-hook statusVG IOS Version : 12.4(2)T2CUCM Version :8.62/5 -- fxs-ls up up off-hook idle y2/6 -- fxs-ls up dorm on-hook idle y2/7 -- fxs...
