Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello All, So I've been assigned this new project to troubleshoot a sip trunk problem when the voice calls drop sometimes or the users hear undersea sounds. They've been told that there is a CUBE in between the CUCM which is old (8.5) and the SIP tru...
Hello Friends,I´m working with CUCM 6.1 and route pattern and calls to PSTN. I´m receiving and sending 4 digits from PSTN at MGCP Gw. MGCP Gw -> PSTN (4digits) OKPhones -> Phones (4 digits) OKPSTN -> MGCP Gw (4 digits) NOKCSS OKPartit...
Hi, Can someone provide me the BoM for 8831 for North America. I tried with CP-8831-K9=, but it seems CCW is not providing valid BoM. Regards, Vinod
It is amazing issue where i can call to and receive from mobile number but i cannot call to fixed Line numbers to some branches. I can receive calls from fixed. When i call Fixed Line number it says ' The number is incorrect'. I have checked the conf...
Hi, I have following setup: Cisco Call Manager Express 11 on 4331 router (10.192.35.1) Microsoft Skype for Business 2015 server (10.192.35.4) I created gateway and trunk configuration on SfB side, I created voice dial plans on CME side: dial-peer voi...
Hi all, When call coming from PSTN, CME registered SIP phone answer the call, but PSTN side phone still keeps ringing. CME is registered to SIP provider. SIP phone--CME---SIP Provider---PSTN---phone Here is CME configuration: voice service voip ip ad...
Does someone knows Voice Service Domain can be added to a 88XX hardphones for an split DNS MRA solution? Thanks Alex
Hello, we are facing a issue in cucm, All user can dial std mobile call. We have two pattern to dial mobile number 0.[789]XXXXXXXX for local mobile call 0.0[789]XXXXXXXXX for std mobile call but user can dial std mobile call from both pattern, s...
Hi everyone.. Recently we uploaded bulk phone data with aar routing....after that corporate and personal directory both showing "Host not found" Before this uploading both directory worked well. Ip phone model is 7841 and cucm is 10.5 This error sho...
We used the Batch Administration to add several vg224's. The first few registered fine. But the last few wont register. Here are some Gateway Details: Gateway - SKIGW23335F3FBA Protocol - SCCP Port 17 Status - none Port 17 IPv4 Address - none Her...
Hello, I am facing issue while doing outgoing calls then ringing is not played on calling number but called connected, when the calls connected i also not able to hear any voice versa. my setup is = Genesys>>SIP>>CUBE (IN location)>>SIP>>CUBE (UK ...
Hi, I am having strange issue while making outbound calls having CUCM 10.5 environment. let's say i am dialing <00971551234567> and internal extension range is 5xx. one user extension is 567. as soon as i dial above number, instead of going outboun...
Hello , Is there any precautions needed before reboot the cluster. We have 2 sub and 1 pub in a cluster. Give me a suggestion for rebooting cluster.
With ref. to this post: https://supportforums.cisco.com/discussion/13303641/error-ipv4-tftp-errorCan I update the phones firmware to allow registration? I have followed these excellent instructions: https://www.youtube.com/watch?v=D7MeslXuo7QBut, I a...
My call manager cluster in the United States has a SIP trunk to my parent company's call manager and avaya clusters in Mexico. I connect to the PSTN via SIP trunks from my telephony service provider. My parent company has a mixture of SIP and PRI to ...
