Good Afternoon, I need some help, I am migrating my config from an asa5510 to asa5525-x I started to try moving all of the settings over but then it got a little confusing. Is there some one that can help me Thanks
I have a script where i'm running multiple commands and displaying it on the CLI session but am trying to just have the script without repeatedly pressing space which is why i have term len 0 at the start. However it doesn't seem to recognize the ter...
I have ASR1001X and running ISG to manage and maintain customer services.ASR1001-X has 1 subinterface facing subscribers and 2 subinterfaces back to the core then internet.Subinterface facing subscribers is configured with ip nat insideSubinterface f...
hi Everybody We’re designing the system architecture for a specific project and need to calculate the required throughput to select the appropriate firewall throughput and avoid any potential latency.Our cybersecurity applications are primarily the s...
Hi there - I am currently studying at cybersecurity at the university of the sunshine coast here in australia - we have been asked for an assignment to recommend the best products to help with end device and server configuration and hardening - I am ...
Hello!I tested PPTP and L2TP VPN solutions, but considered another solution without the Cisco router involved.I've disabled all the virtual-access and vpdn stuff,sh run all | i vpdnreturns nothing, but the ports for PPTP and L2TP are still open and c...
I'm new to this so please be kind Setting up a Cisco 1010 Firepower device, unboxed it, got it up and running, havent' did any config yet, so its all the defaults I would say. Needed to bring it to the office, once I turn it on, no port lights come ...
Hi Everyone
I am enabling netconf on Cat9k switches and want to use a custom AAA group for it and not just the default.
I have the following configuration that works, but want to change it so we use a named group and not the default:
aaa new-model
!
...
trying to ping router 2 from router 1 cant but ican ping the serial0/0/0 but not either IP Gig0/0 each way on both routers cant reach anything on either side of ea network but can ping router 1 network from router 1 and same for router 2 please help ...
Hello
I just wanted to confirm if cisco switches default back to local authentication/accounts if TACACS is disabled/unreachable?
So what happened is I accidentally created the wrong ACL and applied it to the VTY lines and it has blocked all ssh acc...
Hello,Path of archive is configured as follows:path sftp://username:password@IPaddressofSFTP/The password is visible (clear text).Is there any way to encrypt password of SFTP in conf file?
Hi We recently acquired a Cisco NCS 540 router and are currently facing some challenges with MPLS testing. Despite our efforts, we are unable to access the necessary MPLS commands on the device. This leads us to believe that the required features mig...
What is the criteria to create SVI and VLANs in the 9800. If you take multiple AP management bands (vlan) to the same network Do I have to need several SVI and/or Vlans?
I've got 15+ Cisco ISR 4000's (a mix of 4331s and 4551s) in our network and when trying to setup Netflow to PRTG, It seems that when I hit 5 interfaces that need to be monitored, there is always 1 that won't come up in PRTG and that doesn't send data...
