I would like renew CWMS External SSL certificate but cannot generate CSR for new certficate following this figure please guide us
I would like renew CWMS External SSL certificate but cannot generate CSR for new certficate following this figure please guide us
I have a QOS configuration for interactive video among other queues. class-map match-any QOS-INTERACTIVE-VIDEO match ip dscp af41 af42 match protocol rtp video match protocol ms-lync-video match protocol skype match protocol h323 match proto...
Hey, The security team at my business is looking to get the best solution to preventing our Citrix desktops from getting updates everytime they restart, instead reaching out to the base image citrix XenDesktop server to get policy and definition up...
I'm currently writing an IVR Script, and I want to know if it is posible to change the Prompt audio format from CCITT u-law 8 KHz, 8Bit, Mono 7 kb/sec, to another format like GSM 6.10, and still be playable from the IVR. Or if there are any cisc...
Hello community, could you advse me the best way how to bring my customer's CUCM 9.1 back to sufficient licensing state since the demo period was expired? The customer exceeded its licensing capabilities by adding remote destination to a user that re...
When using the CMA and in a meeting with alot of participants my pc performance drops considerably To the point where typing and mouse movements are not responsive immediately My system resource are barely at 50% !!!!! anyone else experiences this?...
Back when Prime was starting out someone released a video where an admin logged into CUCM to setup a phone, than Unity connection, than presence (the standard on boarding process) while doing a split screen with Prime on the other side and a running...
I am working on a issue for our collaboration cluster which consists of CUCM Pub & Sub, and CUC Pub & Sub. We have notice the CUC Pub randomly loses synchronization with our local NTP server. No other devices in the cluster are experiencing the issue...
I am trying to upgrade my Cisco ATA190. But the Firmware files are not available on Cisco site for CME 11.5. And Please help me configure Cisco ATA 190 on CME 11.5. My ATA firmware is 1.0.0 (4).
Phone A is forwarded to Phone B. A call comes in to phone A and forwards to phone B, but then the caller leaves a voicemail, the voicemail is left in the voicemail box of phone A. How do I get the voicemails to left in the voicemail box of phone B?
Hello all, I would ask you , if i can configure two interface card network 1 and 2 on cisco busness edition 6000 with same vlan, connected on two different switch? how to do it? can you help me please Best regards
I have deployed an External Database and MFT. The communication between MFT and the DB is good, but IM&P is not communicating with the DB. The following connections between the IM and Presence Service node and the external database server failed...
Hi Team, I Have new requirement for new site need help from you people to create BOM Jabber - 302 numbers (licencing and jabber client version) Hardphone - 82 CUCM version : 10.5 i have configure Jabber on site B where i have to configure CME....
Hi Guys, Anyone know BE4000 can configure work together with ISDN30 and SIP Trunk in the same time? Basically current my system is configure work in ISDN30. Due to some requirement with our business partner from other country we would like to lin...
Dear I have a probleme about R2 channels Block (r2_q421_blocked), when channels are blocked, i shut/no shut under controller E1, the channels unblock and after a while they become block. We use a 2800 (IOS 12.4) as a voice-gateway, connected to H...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-22-2024 04:46 AM | ||
04-18-2024 07:46 AM | ||
04-15-2024 07:41 PM | ||
04-09-2024 02:09 PM | ||
02-25-2024 06:28 AM |